I am with you on THAT, my friend. LED's at some point in the future. But for now, my LFS suggested going to a computer place and finding a similar sized fan, cover the electrical line outlet slot on one side with packing tape to seal it off, and put the new fan over the other hole so that it's drawing air IN. I've already reversed the fan's in the hood (that voids the warranty) and it made the tank temp about 1 1/3 degrees cooler than the stock setup, but still not enough. So, all three fans would be pulling air into the hood and and the new fan would exit it thru the larger slots on the front sides of the hood and I'm hoping the additional fan will drop my top temps 2 degrees to the low 80's rather than where they are now with the lights on. Some of this heat may be biological as I have a very high ammonia pulse right now, due to cycling, but I certainly can't imagine bio activity helping to raise my tank temps to the mid 85's. The fan in back would blow across the light cover cooling the air around it as well as cooling the water surface. Yes, my evap will go up, but I'm willing to top off more often if it means I can keep the top closed and actually keep fish and some zoas, instead of just warm water. I've been in touch with the company and a very nice rep made several suggestions, so they're aware there is a problem. Someone suggested I up grad to the new biocube with the LED's, but I think I'll hold off. In 45 years, I have never had this much trouble setting up a tank, including when I had my tank maintenance business. I will post results of my experiments. I just have to find a fan that has it's own power transformer.