how I connect 2 Jebao wp60 to the apex?

redsea · Apr 23, 2014

I am trying to find a way to connect 2 wp60's to my apex. the RA cable can connect only one. is their is a dual cable or a DYI method?

YodaHart · Apr 23, 2014

You just need 2 RA cables.

Wiring & Controlling a Jebao WP Pump to an Apex

redsea · Apr 23, 2014

YodaHart said:
You just need 2 RA cables.

Wiring & Controlling a Jebao WP Pump to an Apex[/QUOTE but I only have V1/V2 and V3/V4 on my apex which I use one of them for my AI sol's? so I have one port left?

YodaHart · Apr 23, 2014

So you use 3 outputs for the AI Sol or only 2 outputs? If you still have V3 and V4 then you can use those to control both pumps. If you only have V4 left then you can use 2 RA cables both connected to V4. This will force you to use both pumps at the same speed all the time.

redsea · Apr 24, 2014

YodaHart said:
So you use 3 outputs for the AI Sol or only 2 outputs? If you still have V3 and V4 then you can use those to control both pumps. If you only have V4 left then you can use 2 RA cables both connected to V4. This will force you to use both pumps at the same speed all the time.

Ok
I have full apex and VDM to control the AI Sol's the Sol's are plugged via serial cable. Does that means I still have the v1/vs and the V3/V4 on the apex free what about the ones on the vdm?

Torx · Jun 29, 2014

redsea said:
Ok
I have full apex and VDM to control the AI Sol's the Sol's are plugged via serial cable. Does that means I still have the v1/vs and the V3/V4 on the apex free what about the ones on the vdm?

Probably already have an answer, but yes, you should still have those port available. As for hooking 2 to one cable, google Torx's Jebao WP Apex harness, and you will come across a few threads. Plus here is a video of me making one that controls 2 pumps from one harness.

[video=youtube;8bQbLCE7NwE]https://www.youtube.com/watch?v=8bQbLCE7NwE[/video]

redsea · Jun 30, 2014

Torx said:
Probably already have an answer, but yes, you should still have those port available. As for hooking 2 to one cable, google Torx's Jebao WP Apex harness, and you will come across a few threads. Plus here is a video of me making one that controls 2 pumps from one harness.

[video=youtube;8bQbLCE7NwE]https://www.youtube.com/watch?v=8bQbLCE7NwE[/video]

Thanks A lot...Very Helpful