How many Radion XR30W G4 Pros

[TheHarold]

4 radions gen4pro , mp60 and 3 mp40

Into one outlet on the EB832?

 

[ecam]

Yeah. I use outlet 4 for it

 

[TheHarold]

Yeah. I use outlet 4 for it

That’s over the rating of the outlet, if you are running the Radions at full power. Read the instructions... don’t blame them if there’s is a problem

 

[ecam]

I’ll double check the wattage Thanks for the heads up

 

[TheHarold]

I’ll double check the wattage Thanks for the heads up

It’s 7amps max per outlet and 15 amps total. Your 4 XR30w Pro gen 4 can pull 6.3 amps, plus the powerheads. Perhaps not “over” the rating, but close enough that I would personally prefer splitting it up into 2. Of course this is assuming you run at 100%. And I am sure there is some leeway on their rating with a safety margin.

I have 8 radions, ~13 amps, on their own circuit plugged directly into a wattage meter and then GFCI. My two EB832 handle the rest of the equipment, mostly lower draw stuff besides the heater.

 

[Zohar78]

4 radions gen4pro , mp60 and 3 mp40

how much wattage did that pull? and you must turn most of the equipment down? the xr30g4 pro can pull up to 190 watts alone.

 

[ecam]

Guys... im sorry i just checked my setup.....

I have two tanks.....

My frag tank
I have 3 Gen3 pros and 2 Mp 40s on a strip connected to eb832... Im currently drawing 177W or 2.1 Amps.. its high noon for the lights so thats peak load..

my display tank.
Only the Powerheads are on a strip connected to the Apex... the lights are on a power strip connected directly to the wall.