Hydra 26 HD lighting schedule help

[Jesterton]

Hi I recently purchased the AI Hydra 26 HD to go over my 24 gallon jbj Cube previously I was running a kessil a80 at about 75% for 4 to 5 hours needing help to find a decent lighting schedule that won't burn out my Corals in the tank lots of LPS two or three mushrooms some RTF zoas
And two pieces of sps attached is the schedule that I ran today for the first day and I did run the acclimation mode thanks in advance!

 

[TARHEEL78]

Welcome! Try this thread out, plenty of presets available for download there.

AI Prime & Hydra lighting presets

For those of you searching for preconfigured lighting profiles for your units I have created a Drive folder for anyone to download and use. If you want to share your settings with everyone please feel free to let me know and I'll post it in the folder as well...

www.reef2reef.com

 

[JFLU]

Here is what I run with par levels if that helps you out.
Runnning 1 26HD
Mounted 12in high
Tank is about 30in wide and 19 in deep.

 

[Jesterton]

Same height on the mounting
18" wide
15"deep
Should be lower the %'S a little if so how much?

 

[JFLU]

Same height on the mounting
18" wide
15"deep
Should be lower the %'S a little if so how much?

I would probrbably Lower the
V- 15%
Ry- 20%
B - 20%
Then just adjust 5% at a time depending what your corals tell you.

 

[JFLU]

Could probably lower Uv by 10% too