Hydra 26HD - No indicator Lights on, is it dead?

[schooncw]

I have 3 x Hydra 26HD and one just quit! No indicator lights of any colour at the back at all. I still went through the reset function, plugged it in, out, etc. and its not the power, as I switched the cord. Light is probably dead? Any opinions?
Thanks.
The lights are seven years old

 

[Lbrdsoxfan]

Maybe a bad power supply? Id try that first, otherwise after 7 years, it may be a end of a run for that light.

 

[schooncw]

I switched power cords and nothing. Am thinking dead.
Unfortunately, I do not believe the 32’s are compatible w 26HD.

 

[Lbrdsoxfan]

I think the older 26's and 52's of that era are it, in terms of compatibility.

 

[oreo54]

I have 3 x Hydra 26HD and one just quit! No indicator lights of any colour at the back at all. I still went through the reset function, plugged it in, out, etc. and its not the power, as I switched the cord. Light is probably dead? Any opinions?
Thanks.
The lights are seven years old

@_AV

 

[a.t.t.r]

If it’s anything like the radions. Mine did this a few times. RAPID(several times per second) power cycling on the dc side of the transformer kicked them back on 4 times so far in a year.

 

[_AV]

I have 3 x Hydra 26HD and one just quit! No indicator lights of any colour at the back at all. I still went through the reset function, plugged it in, out, etc. and its not the power, as I switched the cord. Light is probably dead? Any opinions?
Thanks.
The lights are seven years old

Assuming it didn't get water damaged, and you've already tried swapping power supplies, the issue is likely with the main board. The short on the main power circuit is a fairly common problem with this light.

Here's one of my repair videos which could be relevant: