I need acrylic or glass cylinders

[jasonrusso]

I bought a new doser that has a built-in mixer. I am having a hard time finding cylinders for it and the "real ones" are on backorder and very expensive. I tried VOSS bottles, but the bottom need to be flat.

They can be glass or acrylic. Preferably with a cap, but I can figure that out if not.

60mm od, about 500ml

https://www.shop-meeresaquaristik.d...A-Series-Dosing-Depot-Set-VDEPOT4::16858.html

 

[Crabs McJones]

I bought a new doser that has a built-in mixer. I am having a hard time finding cylinders for it and the "real ones" are on backorder and very expensive. I tried VOSS bottles, but the bottom need to be flat.

They can be glass or acrylic. Preferably with a cap, but I can figure that out if not.

60mm od, about 500ml

https://www.shop-meeresaquaristik.d...A-Series-Dosing-Depot-Set-VDEPOT4::16858.html

Don't know if you have one near you, but for my wedding we got these tall glass containers that we put flowers underwater and floated a candle on top. Sounds almost exactly what you're referring to. Don't know if you could make something like this work
These ones are 10"
https://www.hobbylobby.com/Floral-W...ntainers/Narrow-Clear-Glass-Cylinder/p/157365
These ones are 12" and a bigger diameter
https://www.hobbylobby.com/Floral-W...ers/Containers/12"-Glass-Cylinder-Vase/p/3952

 

[cracker]

You might try a commercial plastic supply . what's Ah Tap plastics or sych? Who's the Guy here who makes ATS & acrylic fabrication, advise. His Avatar is Johnny Carson. He might could help Ya.

 

[jasonrusso]

Don't know if you have one near you, but for my wedding we got these tall glass containers that we put flowers underwater and floated a candle on top. Sounds almost exactly what you're referring to. Don't know if you could make something like this work
These ones are 10"

3 3/8" wide is 85mm. I need 60 mm

 

[siggy]

Exotic inc. Is a large Industrial supplier, Motion industries, and Alro are also a good source, BUT.... LAIRD plastics should be the first place you should look for DIY and of course there's ebay for cutoffs and leftovers for cheap!

 

[ca1ore]

Do you mean for the GHL doser? The 'mixer' is just a port for a stir bar accessory and it can handle up to 94 mm diameter containers (according to the notes)? I'm using one even bigger than that.

 

[jasonrusso]

Do you mean for the GHL doser? The 'mixer' is just a port for a stir bar accessory and it can handle up to 94 mm diameter containers (according to the notes)? I'm using one even bigger than that.

No, it's a arka gt doser

 

[siggy]

No, it's a arka gt doser

60mm ID or OD....take a pic of the specifications
https://www.ebay.com/itm/1pcs-60mm-...772634?hash=item28220a005a:g:CXYAAOxyyq5TPUZP

 

[jasonrusso]

OD, I put it in the original post.

 

[Airwarf]

These guys sell just about anything you're looking for, but they're pricey. McMaster.com

Not sure if they sell it in metric units though.