I need help w pvc

Welcome to R2R!

Ah pvc pipe, we have all been there. You will get some great advice on this site. Good luck.

9BED1422-D976-4ED3-9EED-0ECA2BB94436.gif
 
Last edited:
Welcome to R2R
Do a Google search on PVC repair.
In most cases you have to cut out the glued pieces and start again. If you're asking how to detach glued pieces, you can, it requires a heat gun and care.
Welcome and good luck with your issue.
ZomboMeme 07062021225029.jpg
 
Hello I have questions I fix my pipe w a T I primed and glued it and I have a link how do I fix it
There's a glue called Red Hot that you might be able to apply to the outside. The only other option is to cut the pipe and reglue new fittings using couplings where you cut the pipe.
 
You’ll either have to start over or you can apply the blue pvc around the joint and it should seal
 
Hello I have questions I fix my pipe w a T I primed and glued it and I have a link how do I fix it

Welcome!

Good advice on this thread already for you. When we put in our plumbing, we knew things would change so there is little to no glued joints. Instead compression steel (titanium underwater, might be overkill) bands tighten fittings. We are also slowly transitioning from clear tubing (from local hardware store) to black tubing (from BRS) due to lighting sump for refugium is also growing gunk in our lines.

Glad you joined! Good luck
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top