Icecap gyre 1k

[brownjoshua475]

I have a icecap 1k gyre on a biocube and its producing a lot of microbubbles in my tank. I have it on the side of tank and shooting across the top of the rock work. If you guys have any advice on these and how to eliminate them that would be awesome thanks

 

[brownjoshua475]

 

[Saintnovakai]

If its picking up air then it might be too close to the surface. Also I'd turn it or shake it a few times below the water surface to dislodge any air that might be trapped inside.

 

[Qasimja]

i have an icecap 3k and mine was doin the same thing i fixed it by turning it off and cleaning it some

 

[brownjoshua475]

i have an icecap 3k and mine was doin the same thing i fixed it by turning it off and cleaning it some

Ya that's what I did I took it out to clean it and put it back in the tank and that's when I started to get the micro bubbles

 

[michael giordano]

Rotate the end covers around to get a desired flow it will transfer how it moves water in direction as well.

 

[brownjoshua475]

Rotate the end covers around to get a desired flow it will transfer how it moves water in direction as well.

Ok thanks