Ideas for an Anemone only aquarium for propogation

drubatuba

New Member
View Badges
Joined
Apr 5, 2015
Messages
19
Reaction score
4
Rating - 0%
0   0   0
Hey everyone,

I've thought about doing this for a while but have kept putting it off. I've got a couple spare parts lying around and a bunch of anemones in my main tank (RBTA). What I normally do is when I see them getting out of hand I'll throw in a lose rock near them and wait for 1 or 2 to climb on. Then just pull them out and take them to my LFS for trade. I've had such good success with them so I thought why not try to build up a good amount so that I could sell and maybe make some money.

I've got a spare 20 gallon tank and a couple extra power heads that I could throw some sponges on to make them anemone safe. Got plenty of spare heaters as well.

But I'm wondering what would be best for filtration.

I've got a HOB filter that's plenty big enough as well as a couple canister filters. The main intent of this aquarium is to only house anemones and at most a pair of clowns. Should I opt for the canister or stick with the HOB? Do I even need a filter? Is bio load even that big if its just nems and a couple clowns? Also wondering if protein skimmer is necessary.

Is there anything else I missed?

Would appreciate any advice.
 
IMHO, RBTA's want water quality and light and food just like most other aquarium critters. I'd go for the HOB filter, but it really is a matter of which one cleans the water better and which one is easier for you to maintain? Skimmers are never necessary, but they are always a good idea to have in use.

I have a 16g with a HOB filter and a small Tunze in tank skimmer and with a minimal bio-load and it's been fine so far. I do a 3-5 gallon water chance every 2 or 3 weeks and use water from my 40g cube rather than new saltwater.

If you really want the RBTA's to do well, skip the clowns, they will be a bigger bio-load than 10 anemones.
 
IMHO, RBTA's want water quality and light and food just like most other aquarium critters. I'd go for the HOB filter, but it really is a matter of which one cleans the water better and which one is easier for you to maintain? Skimmers are never necessary, but they are always a good idea to have in use.

I have a 16g with a HOB filter and a small Tunze in tank skimmer and with a minimal bio-load and it's been fine so far. I do a 3-5 gallon water chance every 2 or 3 weeks and use water from my 40g cube rather than new saltwater.

If you really want the RBTA's to do well, skip the clowns, they will be a bigger bio-load than 10 anemones.
This is really insightful. Much appreciated. I may opt to add the protein skimmer at some point.

As for the clowns. I was planning on adding them mainly because I was concerned there wouldn't be enough bioload to keep a healthy ammount of benefial bacteria. Maybe I'm wrong on this though.
 
No, you have a good point about having some added bio-load for the bacteria. But if you want the anemones to grow and replicate, you'll want to fed them and that should provide enough food for the bacteria. BTW, I have lots of rock flower anemones and I spot feed them with a turkey baster while I have ALL the pumps turned off. That way the nems get the bulk of the food and less uneaten food flowing around. But then your clowns would help out in that regard as well.

You should do a build thread. I'd like to keep up with your progress.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top