Is this safe

  • Thread starter Thread starter Daddy-o
  • Start date Start date
  • Tagged users None

Daddy-o

2500 Club Member
View Badges
Joined
Aug 7, 2017
Messages
2,685
Reaction score
3,911
Location
Redwood City, Ca. 94062 (San Francisco Bay Area)
Rating - 0%
0   0   0
Figure you guys are pretty handy. New panel in my daughter's apartment bathroom

IMG_5055.jpeg 60513836782__076E576C-6143-40FD-BCA9-D50DCE15FA66.jpeg
 
I would question landlord /mgmt co. Doesn't look code to me but I'm going by pics that appear that box is not mounted correctly. Or was not pushed back flush after work was done. Mgmt needs to explain to you why it looks like this IMO
 
Is it safe? Yes, because all connections are inside the panel. Is it to code, no.

I’d be calling the office and demand it have trim around it or something...at least “fill” the gap.

If not, take pictures, print them out, and have the landlord sign them so you cannot be held liable for anything after the fact.
 
Last edited:
Figure you guys are pretty handy. New panel in my daughter's apartment bathroom

IMG_5055.jpeg 60513836782__076E576C-6143-40FD-BCA9-D50DCE15FA66.jpeg

If wood studs are being used, according to code, the box must he flush to the wall. If using a non-combustible wall material (steel studs, concrete, etc) then there can be up to 1/4" gap. In either case, the panel looks to be against code.
 
agree ask questions
 
Figure you guys are pretty handy. New panel in my daughter's apartment bathroom

IMG_5055.jpeg 60513836782__076E576C-6143-40FD-BCA9-D50DCE15FA66.jpeg
It is against code to have a panel in the bathroom. And the workmanship on that panel just stinks. A flushmount panel should be flush so thats another code no no. Whatever "electrical contractor" did this needs their license revoked!

Heres some relevant National Electrical Code blurbs.

An electrical panel containing the service disconnecting means cannot be located in a bathroom [230.70(A)(2)].
In dwelling units and guest rooms or suites of hotels and motels, overcurrent devices cannot be located in bathrooms [240.24(E)].
 
Last edited:
Does meet any electric codes and must be secured properly. Would not accept this in My room what says that of my Children.
 
They replaced a previous panel. My daughter asked about the gap and they said they will fill it. She only has to stay here til June.
Filling it wont fix the fact that its in a bathroom...and NO a panel in a bathroom isnt "grandfathered" in even if there was one there before 1993 when it was legal.
Glad shes only there til June. If the workmanship outside the panel is that bad, whats it like on the inside where it really counts?
 
Filling it wont fix the fact that its in a bathroom...and NO a panel in a bathroom isnt "grandfathered" in even if there was one there before 1993 when it was legal.
Glad shes only there til June. If the workmanship outside the panel is that bad, whats it like on the inside where it really counts?
Crap, that means they didnt pull a permit? They are doing maybe 100 apartments. Suppose I should contact her local building/planning office?
 
no
 
Really sucks! all of these apartments have college kids. So some moron has put approx. 300 of our children at risk.
The reason for no overcurrent devices in a bathroom is moisture...wet floors, water being splashed etc. Not safe for people and very hard on the equipment. Aluminum bussed panels and moisture dont work well. The aluminum corrodes and the breakers get loose where they clip onto the buss. Bad connections=heat=not good.
 
i would still call local bldg dept ,make aware if not
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%

New Posts

Back
Top