jareef
New Member
hello everybody
reefer since few years now i'have a 150x80x65 cm , 200g (60x32x25in) in water since the end of 2016.
System Profile:
With some NO3 problems in 2017 the sps not grown and died.
I've test i think everything to lower NO3 to finally return to the basic and found the problem which i think was my osmolation station. I think the debit pressure in the entrance is to powerfull . Anyways i'v got NO3 in the osmose water. Since i correct it my NO3 goes frome up 64 to around 8 actually.
My fishs are:
1 Paracanthurus hépatus, 1x Siganus (Lo) vulpinus, 1x Zebrasoma veliferum , 1 Zebrasoma flavescens, 1 Centropyge bispinosus, 1 Odontus niger, 1 Labroides dimidiatus, 1 Macropharyngodon ornatus femelle, 1 Anampses linéatus, 1 Cirrhilabrus Rubrisquamis, 1 Salarias ramosus, pholidichtys leucotaenia, 1 Gobiodon okinawae, 2 x Pterapogon kauderni, 6 Chromis viridis,
1 couple d’Amphiprion ocellaris « black »
Coral are : anemone heteractis magnifica, little anemones, euphyllia, 5x differents zoanthus, pachyclavularia...
Year 2018 begin well cause i've found my NO3 problem (i think), i found my pholidichtys leucotaenia (i think he was dead) and i found a little kauderni baby of half inch in the cheatomorpha refugium.
reefer since few years now i'have a 150x80x65 cm , 200g (60x32x25in) in water since the end of 2016.
System Profile:
- Display tank: 200g (60x32x25in)
- Glass or Acrylic: Glass
- Stand: Custom built by a french company
- Sump: glass sump with a refugium part and cheatomorpha
- Protein skimmer: Coral Box Cloud C9 DC (great i recommand)
- Carbon/phosphate filtration: not any more
- Return pump: Eheim 1262
- Water circulation: 2 x Tunze stream 3 (6150) with ,no noise
- Lighting (display): DIY led build 8x90w (at 55%)
- Lighting (refugium): 60w chinese led horticultur for cheato and 20w DIY horticultur led
- Calcium Reactor: Bailing method with 3 parts with digidoseur from neo3plus
- Auto top-off: with Profilux
- Heating/cooling: Schego 600w on profilux
- System control: Profilux 3.1Nex
- Any other details: UV which i do not use, juste in case
With some NO3 problems in 2017 the sps not grown and died.
I've test i think everything to lower NO3 to finally return to the basic and found the problem which i think was my osmolation station. I think the debit pressure in the entrance is to powerfull . Anyways i'v got NO3 in the osmose water. Since i correct it my NO3 goes frome up 64 to around 8 actually.
My fishs are:
1 Paracanthurus hépatus, 1x Siganus (Lo) vulpinus, 1x Zebrasoma veliferum , 1 Zebrasoma flavescens, 1 Centropyge bispinosus, 1 Odontus niger, 1 Labroides dimidiatus, 1 Macropharyngodon ornatus femelle, 1 Anampses linéatus, 1 Cirrhilabrus Rubrisquamis, 1 Salarias ramosus, pholidichtys leucotaenia, 1 Gobiodon okinawae, 2 x Pterapogon kauderni, 6 Chromis viridis,
1 couple d’Amphiprion ocellaris « black »
Coral are : anemone heteractis magnifica, little anemones, euphyllia, 5x differents zoanthus, pachyclavularia...
Year 2018 begin well cause i've found my NO3 problem (i think), i found my pholidichtys leucotaenia (i think he was dead) and i found a little kauderni baby of half inch in the cheatomorpha refugium.
