Theres a seperate adapter to connect jeabo products to the apexI have the 6000, but I don't remember an apex cable. This is all I have received (downloaded from. The product page).
I know, but this is not jebao.
In the link you provided it says that it's supposed to come with the Apex cable. Still these pumps with all that comes with them have come up in the world!
That sensing switch for the jebao is what I read earlier I was getting the jebao and coral box confused
I have one and from what i have seen it ramps up to the preset level. The pulse is about a 10second ramp up and maybe 3-5 second pause. I think the higher the setting the longer the pulse length of time would be for the ramping up. I have it running mth holding tank now so i have it ath about 30% constant power.
Is is at both i dont think it was intended to be used as a main return pump on the wave setting . If using it in wave mode it is more of a dedicated wave pump that would be used on a closed loop or possibly plumbed before the return pump chamber though this could be an issue with the overflow box and noise i suppose. My plan is to run a dedicated drain pipe on the overflow box connected directly to the pump and the return plumbing ran through the rockwork hidden and have the vca random flow nozzles at multiple outlets. The 2 dcp20000 pumps will be the main returns. I have one powering my 180 gal display now.
I was not suggesting your post about a different manufacturers pump should be deleted, just pointing out the reason i said the things i posted, , and the bit of attitude in your post , caused me to point out the fact this thread was entirely about the jeaboline up to the point you started posting about another manufacturers product. While i did not follow the bouncing ball per say, the fact a volleyball ended up on a soccer field ad was mistakenly kicked is not the soccer players fault.
