Jebao wave maker whit real 0-100% ?

[Patx]

Hello,
are there any jebao pumps (elw-eow... etc...) that do real 0-100% pulse.
I don't want 30-100% like my "gyre knockoff"
(yes, there is cross-flow mode, but the "5 minimum" frequency is not fast enough for my needs....) thanks.

 

[Patx]

or maybe it's just the knockoff gyre that can't do 0-100% pulse ?

 

[BriDroid]

Good question, my new ELW-3M is only 30-100%. I really wanted it to be 0-100% and was not happy when I got it and found out...

 

[Patx]

Good question, my new ELW-3M is only 30-100%. I really wanted it to be 0-100% and was not happy when I got it and found out...

Ok so this:

Results almost like a 30% constant mode ?

I see video whit the "old controller" the pump totally stop in pulse mode.

 

[Patx]

 

[BriDroid]

Ok so this:

Results almost like a 30% constant mode ?

I see video whit the "old controller" the pump totally stop in pulse mode.

At 30%, I have my frequency up at 100%, I can hear the pump ramp up and down, so it's changing speeds, but it never stops when I shine a flashlight on it and watch the propeller. It is changing speeds though...

 

[lesismore]

Can anyone please explain the differences between the ELW and EOW models? I see the EOW has a higher gph rate. Thank you!

 

[Patx]

Can anyone please explain the differences between the ELW and EOW models? I see the EOW has a higher gph rate. Thank you!

Look the image.
EOW are not the same model as ELW or
Ecp...mpc ...scw.. Lmnop whatever etc...
Some are tunze, nero, gyre look etc...
For gph look at spec

 

[lesismore]

Look the image.
EOW are not the same model as ELW or
Ecp...mpc ...scw.. Lmnop whatever etc...
Some are tunze, nero, gyre look etc...
For gph look at spec

They are 2 different Jebao models. I was wondering if anyone who is familiar with Jabao knew what the actual difference was.

 

[Patx]

At 30%, I have my frequency up at 100%, I can hear the pump ramp up and down, so it's changing speeds, but it never stops when I shine a flashlight on it and watch the propeller. It is changing speeds though...

I have the impression that those whit the controller (knob) can do the 0% that we want.
Can't totaly confirm for now... but...
(See previous video)

W1 MODE : real on/off
speed bar light for the speed
Knob for "the frequency"