Kalkwasser
- Thread starter Hammy1
- Start date
- Tagged users None
Sounds realistic.
Calcium will be used up in line with alkalinity, almost exactly. Calcium at 500 shouldn't cause issues. If you are doing waterchanges, it will trend towards whatever your new saltwater tests at.
Tropic Marin Classic is similar, that's what my tank is at. At least, last time I checked, lol.
TWYOUNG
Well-Known Member
20mls AFR per day was maintaining the alk of my lightly stocked 135g tank at 10 dKh. I stopped it to do Moonshiners and I'm now up to 4L kalk per day to maintain 8.0. Kalk just doesn't seem to be very potent to me. 35mls soda ash promptly raised me to 8.0 after dropping to 7.7.
Randy Holmes-Farley
Reef Chemist
Staff member
Super Moderator
Excellence Award
Expert Contributor
Article Contributor
R2R Research
My Tank Thread
Like saying I ate an apple, and I'm still hungry so am giving up apples?
That's a low dose, the pH is close to normal, and kalkwasser alone at any attainable dose is often unable to give folks as much pH boost as they want.
Randy Holmes-Farley
Reef Chemist
Staff member
Super Moderator
Excellence Award
Expert Contributor
Article Contributor
R2R Research
My Tank Thread
Limewater (kalkwasser) is very slightly overbalanced to too much calcium (as is AFR), and calcium will very slowly rise long term if you dose enough to maintain alkalinity against calcification.
That said, 15 mL in 60 liters is an extremely low dose and only boosts alk by less than 0.1 dKH and calcium by less than 1 ppm.
Hammy1
New Member
I have been dosing more and more all week, it's now on 160ml a day of full saturation. Still with no difference to my ph. I have now added kalkwasser to my ATO but I don't get much evaporation, so not too hopeful there.
Randy Holmes-Farley
Reef Chemist
Staff member
Super Moderator
Excellence Award
Expert Contributor
Article Contributor
R2R Research
My Tank Thread
I'm not surprised. It takes a large amount of hydroxide to overcome aeration with high CO2 air.
Pntbll687
Valuable Member
- Joined
- Oct 4, 2017
- Messages
- 2,188
- Reaction score
- 2,721
Kalk in the ATO is generally not a great idea, as evaporation can vary a good degree, and so the dosing may be different from day to day.
I'd go through the following
1. Know your alkalinity consumption for 24hr. Test your alk everyday at the same time for 3 days to figure out how much alkalinity your tank is using
2. Go here https://reef.diesyst.com/chemcalc/chemcalc.html , enter your system info. Use 8.0 as the starting alkalinity, and 8.0 + your 24hr consumption as your desired alk. The actual values do not matter, just that the difference from starting alk and desired alk is how much your tank consumes in a day
3. Pick "saturated limewater" as product
4. This will give you a dose that is needed for 24hrs. You can dose how you want, but spread the dose out, don't dose it all at once
You then can adjust dosage from there.
You may or may not get to the desired ph with kalkwasser, there's only so much kalk you can dose.
Pntbll687
Valuable Member
- Joined
- Oct 4, 2017
- Messages
- 2,188
- Reaction score
- 2,721
You can add vinegar to dissolve more kalkwasser into solution.
You can also keep the kalkwasser constantly mixing in a container (with a powerhead) and add as much kalk as you want, you then dose this as a "slurry" solution.
I dose 1.3ml a minute of 2x concentrated kalkwasser (4tsp per gallon) from 8pm to 8am. You can tell the difference in the ph graph when the dosing happens, ph falls much slower than without.
