Kamoer F4 Dosing Pump Help Please...

[happysalt]

Hi So I had unplugged my dosing pump and moved it across the country with me. Been manually dosing everything for a few weeks and just went to hook it back up when now all of the heads are constantly running. THey are running as a lower speed and when I go in to manually dosing amounts the pumps speed up to their normal speeds but they are just not stopping. Tried taking the dosing heads off and the little spindles are just spinning now. Trying to figure out whats going on. Anyone ever had this before?

 

[SPR1968]

Hi So I had unplugged my dosing pump and moved it across the country with me. Been manually dosing everything for a few weeks and just went to hook it back up when now all of the heads are constantly running. THey are running as a lower speed and when I go in to manually dosing amounts the pumps speed up to their normal speeds but they are just not stopping. Tried taking the dosing heads off and the little spindles are just spinning now. Trying to figure out whats going on. Anyone ever had this before?

This is probably obvious but I assume you have tried restarting the Kamoer to reboot it

 

[happysalt]

Sooooo....it turns out It was 100 percent my fault. I had a mixed up power supplies and had a 24v power supply from a jebao powerhead plugged into it instead of the 12v one that should have been. Pump seems to be operating properly now.