Kamoer X1 Scheduled Dosing Problems

[uli-the-nihlist]

I'm in a bad mood over this right now.

Kamoer x1 pumps, I have four of them. I realized today they are not running their schedules. They calibrate perfectly, and I can make them dose manually but they will not run a schedule. I've uninstalled and reinstalled the app three times right now. Unplugged them and plugged them back in...

www.reef2reef.com

This is being discussed in another thread, but figured I would also share this to the CoralVue Sponsor page.

My Kamoer dosing pump must have stopped dosing sometime on Friday, because when I observed the tank and noticed my corals were unhappy on Sunday, my alkalinity had PLUMMETED from 8.8 to 5.5. I dose Tropic Marin All for Reef on my Kamoer X1 and based on this drop, the pump obviously hadn't dosed all weekend. The pump works when I send a manual dose through the app, but it does not follow the schedule that is set.

More than a few other R2R members commented on the above thread stating they had a similar experience. While there seems to be a work around (changing from Daily dosing to Weekly dosing and selecting M-Su), this problem is still alarming especially because I depend on the pump to maintain stability in my system.

 

[Rjmul]

Thank you for sharing this.

 

[Michael@CoralVue]

I would encourage anyone that's having issues to contact CoralVue support. I know folks aren't around during the weekend so week days are best. Also the best way to get in contact are always either submitting a ticket WWW.coralvue.com/support . or you can email directly [email protected]

Just out of curiosity are all of you using Android devices?

 

[uli-the-nihlist]

I would encourage anyone that's having issues to contact CoralVue support. I know folks aren't around during the weekend so week days are best. Also the best way to get in contact are always either submitting a ticket WWW.coralvue.com/support . or you can email directly [email protected]

Just out of curiosity are all of you using Android devices?

Thanks for the reply.

Yes, I am using Android

 

[Michael@CoralVue]

Thanks for the reply.

Yes, I am using Android

What’s the name of the App you are using and what version are you using .
This goes for anyone else that might be reading this.

 

[Rjmul]

I would encourage anyone that's having issues to contact CoralVue support. I know folks aren't around during the weekend so week days are best. Also the best way to get in contact are always either submitting a ticket WWW.coralvue.com/support . or you can email directly [email protected]

Just out of curiosity are all of you using Android devices?

I'm using IOS. App is called "x1 pump"

 

[Michael@CoralVue]

I'm using IOS. App is called "x1 pump"

Thanks for the Info! If your still having issues please do report it via the options i listed above. I will be sending this info up the Chain also.

 

[josh...]

I'm in a bad mood over this right now.

Kamoer x1 pumps, I have four of them. I realized today they are not running their schedules. They calibrate perfectly, and I can make them dose manually but they will not run a schedule. I've uninstalled and reinstalled the app three times right now. Unplugged them and plugged them back in...

www.reef2reef.com

This is being discussed in another thread, but figured I would also share this to the CoralVue Sponsor page.

My Kamoer dosing pump must have stopped dosing sometime on Friday, because when I observed the tank and noticed my corals were unhappy on Sunday, my alkalinity had PLUMMETED from 8.8 to 5.5. I dose Tropic Marin All for Reef on my Kamoer X1 and based on this drop, the pump obviously hadn't dosed all weekend. The pump works when I send a manual dose through the app, but it does not follow the schedule that is set.

More than a few other R2R members commented on the above thread stating they had a similar experience. While there seems to be a work around (changing from Daily dosing to Weekly dosing and selecting M-Su), this problem is still alarming especially because I depend on the pump to maintain stability in my system.

I just had this happen to me. What was your solution in the end? In not sure I will be able to trust the company or product anymore. Lost a couple corals on my alk drop due to the dosing pumps not running a schedule.
Thanks

 

[StlSalt]

I just had this happen to me. What was your solution in the end? In not sure I will be able to trust the company or product anymore. Lost a couple corals on my alk drop due to the dosing pumps not running a schedule.
Thanks

Change from a daily to a weekly schedule. You can click on "Cycle Time" to change it. Just make sure all 7 days of the week were checked. I'm not sure what the problem was, if it was the app, not sure if it's been corrected, but this fix seemed to work for everybody.

 

[Rjmul]

I just had this happen to me. What was your solution in the end? In not sure I will be able to trust the company or product anymore. Lost a couple corals on my alk drop due to the dosing pumps not running a schedule.
Thanks

Set it to dose weekly then select all 7 days. For what it's worth coralvue is sending me new pumps

 

[hllb]

Thanks for the Info! If your still having issues please do report it via the options i listed above. I will be sending this info up the Chain also.

Curious what app we should be using? I am not having any issues and I'm on ios with app KamoerRemote. Which is the correct one for the X1 pro pumps? The directions listed the app I'm using.

 

[Michael@CoralVue]

Curious what app we should be using? I am not having any issues and I'm on ios with app KamoerRemote. Which is the correct one for the X1 pro pumps? The directions listed the app I'm using.

 

[A Young Reefer]

Currently having the same issue alk dropped from 8.5 to 5.6 will try the tips listed above

 

[tat2z_21]

This is so frustrating.... my pump will not run schedule, but doses manually just fine. I have submitted a ticket but need to get this thing running. Any help would be appreciated

 

[uli-the-nihlist]

This is so frustrating.... my pump will not run schedule, but doses manually just fine. I have submitted a ticket but need to get this thing running. Any help would be appreciated

If you're running a quick plan, try setting the dosing schedule to "Weekly," instead of "By Days."

When you choose Weekly, just individually select Mon, Tue, Wed, Thur, Fri, Sat, Sun, then load your Quick Plan the usual way. This corrected my issues.

Edit: Even if you aren't using Quick Plan and want to set up your own plan, this configuration should still work.