Kessil AP9X Programming?

[Aspect]

Hey I'm trying to setup a program on the Kessil app for the ap9x and when I setup my daytime light at 50% color 100% intensity it keeps reverting back to 63% intensity when I save it. Anyone know how to fix this?

 

[Montiman]

Hey I'm trying to setup a program on the Kessil app for the ap9x and when I setup my daytime light at 50% color 100% intensity it keeps reverting back to 63% intensity when I save it. Anyone know how to fix this?

Hard to say what is going on. My suggestion would be that with the kessil App you need to create a program and then apply it to the light. You might have done one step and not the other. If you created the program but did not apply it will revert back to what program is applied.

 

[Aspect]

Hard to say what is going on. My suggestion would be that with the kessil App you need to create a program and then apply it to the light. You might have done one step and not the other. If you created the program but did not apply it will revert back to what program is applied.

I found out what is going on, it automatically dims the lights throughout the day based on what time your program has the lights shut off at. I wonder if there is a way to get around this.

 

[Montiman]

The Kessil App will automatically transition between points on the graph. What most people do is use 4 points. 1 dim starting intensity, 1 starting peak intensity, 1 ending peak intensity, and 1 off point.

This way the light will start at the first point a dim normally bluer color. It will increase in intensity and slowly switch to a whiter color until the first peak point, stay at the peak until the second peak point, and dim to off at the last point. A basic example is below.

10:00 am = 0% color 5% intensity
3:00 pm = 60% color 80% intensity
7:00 pm = 60% color 80% intensity
10:00 pm = 0% color 0% intensity

 

[Aspect]

OH I'm stupid, that's so simple. Thanks!

The Kessil App will automatically transition between points on the graph. What most people do is use 4 points. 1 dim starting intensity, 1 starting peak intensity, 1 ending peak intensity, and 1 off point.

This way the light will start at the first point a dim normally bluer color. It will increase in intensity and slowly switch to a whiter color until the first peak point, stay at the peak until the second peak point, and dim to off at the last point. A basic example is below.

10:00 am = 0% color 5% intensity
3:00 pm = 60% color 80% intensity
7:00 pm = 60% color 80% intensity
10:00 pm = 0% color 0% intensity

 

[Aspect]

The Kessil App will automatically transition between points on the graph. What most people do is use 4 points. 1 dim starting intensity, 1 starting peak intensity, 1 ending peak intensity, and 1 off point.

This way the light will start at the first point a dim normally bluer color. It will increase in intensity and slowly switch to a whiter color until the first peak point, stay at the peak until the second peak point, and dim to off at the last point. A basic example is below.

10:00 am = 0% color 5% intensity
3:00 pm = 60% color 80% intensity
7:00 pm = 60% color 80% intensity
10:00 pm = 0% color 0% intensity

Do you know how to hook 2 lights up to one group? I can only get a green and blue light on the 2nd light not 2 blues like the other light.

 

[Aspect]

Wow great lights... Horrendous app.

 

[Aspect]

what the heck is this...

 

[Aspect]

Yeah I think this app just about ruins these lights for me. Shame for nearly $1k you'd think they would invest in a halfway decent user friendly app.

 

[Montiman]

I actually thought it was fine but I only touch it every 3-4 months. Set it and forget it is best with lights.

 

[Jekyl]

So you're enjoying the kessils?

 

[Montiman]

If you want the lights synced you need to add them to the same group. You can the. Assign the program to the whole group. I have 2 9xs 2 360s and 1 360x linked together but started with apex integration so it has been a while since I used the native app.

 

[Aspect]

So you're enjoying the kessils?

They really are stunning lights.

 

[Aspect]

If you want the lights synced you need to add them to the same group. You can the. Assign the program to the whole group. I have 2 9xs 2 360s and 1 360x linked together but started with apex integration so it has been a while since I used the native app.

I don't have the option to add both to a group. I can only switch the lights through the quick reload and then choose one or the other from there.