KH Carer Review and Experience

AI Hydra
Jump to Last
Yes got hold of Kamoer with Digi Talk was determined my machine is messed up. They think with update firmware it didn't complete fully. Anyway they told me to tell Coralvue to send me new unit. Coralvue customer service is really bad.

Yes, new update APP and Machine. There is still some bugs though in app
 
Nutramar Foods
tmccaff said:
Yes got hold of Kamoer with Digi Talk was determined my machine is messed up. They think with update firmware it didn't complete fully. Anyway they told me to tell Coralvue to send me new unit. Coralvue customer service is really bad.

Yes, new update APP and Machine. There is still some bugs though in app
Click to expand...

ya.. the app is buggy.. but im happy now.. im getting consistent results..

Hannah Alk; 8.4
Carer: 8.45

Hydros Ph: 8.13
Carer: 8.18
 
Tidal Gardens
ok I got new unit and still not working. I am thinking has to be reagent. How to test reagent? Dont you use salifert or something?
 
tmccaff said:
ok I got new unit and still not working. I am thinking has to be reagent. How to test reagent? Dont you use salifert or something?
Click to expand...
You can use the pH probe on the KH Carer to see if it is good enough to use. It is in Settings -> Maintain -> Availability of "KH Test Reagent" in the menus.
 
Top Shelf Aquatics
what is it supposed to be 9? I am getting 9.26 and unavailable which I am assuming too much water I added.

I added 889ml (Ro Water) to 111ML Acid..
 
Last edited:
I don't remember exactly but I think it is around 9.15. I got a syringe and added acid .1ml at a time mixed it and let the probe sit for a couple of minutes and retested. I can check mine when I get home and see what it measures. I am at work currently.
 
n2585722 said:
I don't remember exactly but I think it is around 9.15. I got a syringe and added acid .1ml at a time mixed it and let the probe sit for a couple of minutes and retested. I can check mine when I get home and see what it measures. I am at work currently.
Click to expand...
ok, thanks.
 
Top Shelf Aquatics
got it working now. The calibration fluid that came with unit didnt work correctly and the reagent they supply is obviously wrong. I recalibrated using Pinpoint packets and now doing test. Thanks
 
tmccaff said:
got it working now. The calibration fluid that came with unit didnt work correctly and the reagent they supply is obviously wrong. I recalibrated using Pinpoint packets and now doing test. Thanks
Click to expand...
I checked when I got home and here is what I got on mine.

IMG_9601.png
 
mine was 8.97. The calibration fluid that came with it, I am guessing no good. Also, the reagent says 980G to 20ml. What acid you use? And dilution ratio? I used Coralvue after at 8:1 ratio and worked after I recalibrated ph probe. I wish away to test PH probe accuracy. Maybe a feature request? Example if you put it in 7.0 calibration fluid should be close to 7 or something is wrong.
 
tmccaff said:
mine was 8.97. The calibration fluid that came with it, I am guessing no good. Also, the reagent says 980G to 20ml. What acid you use? And dilution ratio? I used Coralvue after at 8:1 ratio and worked after I recalibrated ph probe. I wish away to test PH probe accuracy. Maybe a feature request? Example if you put it in 7.0 calibration fluid should be close to 7 or something is wrong.
Click to expand...
I use the CoralVue at 8 to 1 also. The pH reading is going to be about .15 low since it is sitting in low pH until the next reading. Mine has always read low. If you calibrate both probes at the same time you may get it around .1 difference. The Hydros alkalinity test drains and refills and stirs after the test to keep it closer to the realtime pH. It is usually within .02 of it.
 
I switched out the PH probe to a Milwaukee probe. the unit has been working flawlessly for me and my ph reads within .3+- of my tank probe. ;-) this has finally become a solid unit for me
 
Milwaukee probe where you get it? Not sure which one to get. I was thinking same thing replacing ph probe.

I see two probes MA911B and SE220 from Milwaukee.
 
Last edited:
www.dinkinsaquaticgardens.com
Anyone use reference fluid to check accuracy? If so what you add 50ML and take saltwater in out, I am guessing wait till after it rinses to add fluid. I don't think though you need 50ML to test though.
 
Those tho got the tubing fix and fw update. What are your “current firmware” and “firmware” versions on the last page? Next to the khc icon
 
Hey everyone, I'm considering to buy this gadget and was wondering If there are any news. Especially more of a recommendation or general review rather than technical details. Anyone ready to give me a "rather dont buy" or "I can recommend it but" or so?

Thank you so much!
Best, Constantin
 
www.dinkinsaquaticgardens.com
I’ve had mine about a week, loving it so far. Just get new reagent and some Milwaukee 4 and 7 to get your ph probe calibrated, the solutions shipped with mine were expired
 
I have a used unit, freshly upgraded with the nozzle upgrade kit, available in the marketplace if anyone needs one.
 
AI Nero 5

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%

  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%

  • No.

    Votes: 26 37.1%

  • Other (please explain).

    Votes: 3 4.3%
See comments…

New Posts

Chewy.com
Top Shelf Aquatics
Deltec
Dinkins Aquatic Gardens
TCK Corals
World Wide Corals
Tidal Gardens
Nutramar Foods
New Posts
Back
Top