KH Director discrepancy

[AZMSGT]

@AZMSGT did you make any progress?

To be honest I haven't. I did some re calibrations and had it reading at what I thought was close enough. 7.9 it read this for a couple days. Well the last two days it's dropped to 7.6 and 7.5.
There is nothing in my tank at the moment so it shouldn't just drop.
I got the reference solution and will monkey with it in a couple days.
Thanks for asking.

 

[JoshKReef]

Nothing at all? Not even Coraline?

 

[AZMSGT]

Nothing at all? Not even Coraline?

Well... some algae is starting. No fish in there ( long story) You don’t get coraline unless you seed it, which I haven’t.

 

[Brew12]

To be honest I haven't. I did some re calibrations and had it reading at what I thought was close enough. 7.9 it read this for a couple days. Well the last two days it's dropped to 7.6 and 7.5.
There is nothing in my tank at the moment so it shouldn't just drop.
I got the reference solution and will monkey with it in a couple days.
Thanks for asking.

I'm not sure exactly why, but if your tank is under 6 months old it can cause some alkalinity consumption. It can take quite awhile for an aquarium to reach a nice stable alkalinity even with no coral/coralline.

 

[AZMSGT]

I'm not sure exactly why, but if your tank is under 6 months old it can cause some alkalinity consumption. It can take quite awhile for an aquarium to reach a nice stable alkalinity even with no coral/coralline.

Huh... didn’t know that.. good info. Thank you.

 

[JoshKReef]

Rocks maybe absorb it?

 

[Brew12]

Rocks maybe absorb it?

I don't think rocks absorb it. It's more likely it reacts to stuff that breaks down on the rock. Carbonate is also used by some bacteria in large quantities. Lots of possible pH altering substances in a new system.

 

[smartwater101]

I got some Reference Solution myself, and I wondering: can this be used with other checkers? Like the Hanna checker? Was just curious if its a generic solution that can be used to check calibration of other kits...

 

[Gonzo74]

My KH Director is showing a different date and Time for my tests. It says the last test was in August even though it was an hour ago today 22 October. And the time Is off. Anyone know how to fix this?

 

[Gaël]

My KH Director is showing a different date and Time for my tests. It says the last test was in August even though it was an hour ago today 22 October. And the time Is off. Anyone know how to fix this?

daylight saving time

 

[Gonzo74]

daylight saving time

It’s showing a different month and year.

 

[Gaël]

It’s showing a different month and year.

1970?

 

[smartwater101]

Mine never shows the correct time either. Its more than just an hour off. iirc its correct in the windows app but never in the mobile/web app

 

[Gonzo74]

Mine never shows the correct time either. Its more than just an hour off. iirc its correct in the windows app but never in the mobile/web app

Mine says it’s 2022. I tried downloading new firmware and everything.

 

[arvind]

Upping an old thread to see if someone can guide me. New owner of KHD. It shows 10ish while Hanna shows 8ish. I got my water for an ICP test and it matches Hanna so I know the KHD is off. I've done multiple calibrations of all three pumps. Does any of you have any ideas what I may be missing?

I have ordered reference solution from GHL a week ago and still waiting to hear from them. Don't know if it is even going to be helpful.

 

[JoshKReef]

Have you calibrated the probe? Also are you sure you have your length set correctly? Also can you hear the internal pump stirring as it's testing?

 

[arvind]

Yes I calibrated the probe and also took it out and tested it on 4 & 7 solutions. Length is set right. Double checked triple checked. I do hear a pump running. I can post a video when I get home.

 

[JoshKReef]

Have you opened it? If so I'd like to see a video of a full test

 

[JoshKReef]

I'm not saying to open it if you haven't before or if it's still under warranty

 

[arvind]

No I have not opened it.