KH Keeper plus

[Darklad]

To all KH keeper plus users, is it normal for new unit to result like the one I attached to this post
it's fluctuating so bad, no corals yet !

 

[Cycleguy0623]

Did you do a water change between the result changes?

 

[Darklad]

Did you do a water change between the result changes?

No, tank is 1 month old with small cleaning crew and 2 pairs of clownfishs and dosing nothing atm.

 

[Cycleguy0623]

I have not had the anomalies in a while but when I first set it up the results were a little shaky. I found that my ph probe was a little to high and I also increased the mixing speed and it’s been rock solid since then. It seems that it’s quite sensitive to probe height and calibration.

 

[Darklad]

I have not had the anomalies in a while but when I first set it up the results were a little shaky. I found that my ph probe was a little to high and I also increased the mixing speed and it’s been rock solid since then. It seems that it’s quite sensitive to probe height and calibration.

How often you mix ? Do you use a stirrer?

 

[Cycleguy0623]

I shake my reagent every few days. I use the stirrer on high.

 

[Darklad]

I shake my reagent every few days. I use the stirrer on high.

Thank you so much I'll try to mix with strirrer on high

 

[Darklad]

I shake my reagent every few days. I use the stirrer on high.

Here is what I just did, hooked up a stirrer I have and it going to run daily before each test for 2mins
is the prob hight ok in the vid ?

 

[David_CO]

I would recalibrate your PH probe I’m not seeing a diurnal swing. It’s also probably worthwhile to recalibrate the dose heads. You have to use a scale or it won’t work. The KH keeper is certainly more finicky than my Alkatronic but once I dialed it in it’s worked well.

 

[Darklad]

I would recalibrate your PH probe I’m not seeing a diurnal swing. It’s also probably worthwhile to recalibrate the dose heads. You have to use a scale or it won’t work. The KH keeper is certainly more finicky than my Alkatronic but once I dialed it in it’s worked well.

I have a reef factoy ph meter aka ph prob ^^ in my sump and both probs reads almost the same
all head probs are carefully calibrated not sure what is really wrong KH just jumped high in the test result

 

[David Cher]

is there algae film build up on the probe ?

 

[Darklad]

is there algae film build up on the probe ?

No nothing, the device been running for less than a week

 

[Cycleguy0623]

I can’t tell probe height very well but it looks similar to mine. Mine tests 6 times a day so it’s storing up pretty often. I also have it set to return the sample so it always pulls fresh water by purging the intake line and drawing in new water for a test.

 

[Darklad]

I can’t tell probe height very well but it looks similar to mine. Mine tests 6 times a day so it’s storing up pretty often. I also have it set to return the sample so it always pulls fresh water by purging the intake line and drawing in new water for a test.

Mine return sample before each test then pull fresh sample then test.
I just set like you'rs and make it mix from medium to fast I will re test now and see the result

 

[Darklad]

Retest shows something is wrong with this device...

 

[Darklad]

Update
After zillions of re-calibrating tests etc I found out that top pump dose not function properly
and the red needle that dose regent is leaking. It is brand new device wich is not cheap... whould I recommend buying it ? ofc no. Reef Factory support so far offered me replacing the red needle only...

 

[LittleMaui]

Hello, revisiting this existing kH Keeper Plus thread with a question. What relevance does the pH value on the table have? My kH results seem consistent, but the pH list varies.

 

[Darklad]

Hello, revisiting this existing kH Keeper Plus thread with a question. What relevance does the pH value on the table have? My kH results seem consistent, but the pH list varies.

I got rid of this scam device long time ago, the ph probe is disaster and reef factory already knows about it.