Wanted to check to see if Klean Strip Green Muriatic Acid is an ok source for the Randy's DIY Alk test.
Also if it is ok to use, is my math correct.
Here is the picture of it from Home Depot.
I read from the MSDS and online this is 20% HCl with 13 baume (online).
SG=145/(145-baume) = 145/(145-13) = 1.09848
However the MSDS states the SG is 1.092 to 1.097
Then (1.09858)(1000)(.20) = 219.696 g of HCl
Molecular weight of HCl = 36.46g
So this solution would be (219.696)/(36.46) = 6.025M
Going strictly by the MSDS it would be 6M
In order to get the .1N solution that is required I would need to add 16.6ml of Muriatic Acid to 983.4ml of RO water to get a 1 Liter .1N solution.
Assuming I can use the Muriatic Acid is my math correct?
Thanks
Randy
Also if it is ok to use, is my math correct.
Here is the picture of it from Home Depot.
I read from the MSDS and online this is 20% HCl with 13 baume (online).
SG=145/(145-baume) = 145/(145-13) = 1.09848
However the MSDS states the SG is 1.092 to 1.097
Then (1.09858)(1000)(.20) = 219.696 g of HCl
Molecular weight of HCl = 36.46g
So this solution would be (219.696)/(36.46) = 6.025M
Going strictly by the MSDS it would be 6M
In order to get the .1N solution that is required I would need to add 16.6ml of Muriatic Acid to 983.4ml of RO water to get a 1 Liter .1N solution.
Assuming I can use the Muriatic Acid is my math correct?
Thanks
Randy



