Leaky Pipe

[Jay Z]

Ace sells a pvc 2 part epoxy. I’ve used it to fix multiple leaks over the years. It’s in the epoxy section at the store.

I put one coat on, let dry for 15 minutes, then a second coat and another 15 minutes dry time.

Has always worked on the first try with this.

I’ve tried goop, shoe goo, different caulks and such. All failed.

 

[theMeat]

Epoxy, adhesives, glue, whatever on pvc or pvc to abs connections is crazy . There are specific cements designed to bond the 2 surfaces. Widely available, cheap, fast acting and the best way to go

 

[theMeat]

Also...
With a properly cleaned and cemented bond this will not be a problem, but...
Pressure building up at the bottom of drain pipe with air trying to rise as water falls is what is causing the water to exit the pipe. If you cut the pipe so it’s just above water level it should stop. If you don’t want the noise associated with that than at least shorten the pipe so it’s just below water level. The deeper the pipe goes into water, the more force it has to push water out that joint

 

[Jay Z]

Crazy to some. Normal to others.

Its easy to give directions from behind a keyboard. Unfortunately is not that easy to explain/learn a skill set. Not all are professional plumbers. Leaks do happen. Sometimes just bumping a drain or return line can force a pinhole leak and pulling everything apart is not a "quick or feasible option". You can watch videos, read forums, have someone show you how to do it, and still have no hands on training.

And I 100% agree on the back pressure from the air.

 

[theMeat]

Crazy to some. Normal to others.

Its easy to give directions from behind a keyboard. Unfortunately is not that easy to explain/learn a skill set. Not all are professional plumbers. Leaks do happen. Sometimes just bumping a drain or return line can force a pinhole leak and pulling everything apart is not a "quick or feasible option". You can watch videos, read forums, have someone show you how to do it, and still have no hands on training.

And I 100% agree on the back pressure from the air.

Yeah. Meant no offense. Have seen some crazy stuff in my years of plumbing and as a hobbyist

 

[Dom]

I saw nothing to indicate the goop was reef safe. So be sure that your solution, whatever it is, is a reef safe solution.

I use petroleum jelly. It creates a great seal, provides lubrication for easy assembly and disassembly if you need to break things down for some reason.

 

[theMeat]

I saw nothing to indicate the goop was reef safe. So be sure that your solution, whatever it is, is a reef safe solution.

I use petroleum jelly. It creates a great seal, provides lubrication for easy assembly and disassembly if you need to break things down for some reason.

Have used amazing goop many times to adhere acrylic baffles in glass sump with no issues