let’s see your sump set up

left.png

left side
right.png

right side
have to take new pics as afew things have changed :D
 
Still building it...

Left- 29g overflow incoming, quick 25 g water change capability, heater location and detritus settling. This overflows to

125 main sump with 12 g skimmer section with reactor manifold and additional 10 g water change if needed

Middle- 17g return section with all my sensors, Jabao dcp 18000 and ato

Right- 40 g refugium fed from teed return at 400 gph

Big black box on far right is a 29 g cryptic refugium fed from the manifold at 150gph, overflows into the refugium .

Not shown is a separate 20g long that I plan to derim and make a shallow mangrove tank. Will be fed from manifold at roughly 200gph. Going to put a couple tube anemones and some sexy shrimp in there too. Will be on a ‘floating’ shelf above the fuge


ca389d2bfcf7ef271b62bafc9d09558a.jpg
d06a25621fd7871bcdd991fa75dbc7d1.jpg
0a924a69882b0651c51b33a5e1fc37e3.jpg
 
Old ...

00-Sump.jpg


Under Construction ...

11-15-17-01.jpg


Doser1.jpg


Doser4.jpg


Behind the tank. 20 gallon long refugium, ATO reservoir, UV & work surface. My tank is in the corner of my living room and I can walk behind the tank.

11-15-17-03.jpg
 
Last edited:
This was my DIY mini-sump for an old nano build. Cut the glass myself.
fuge2.jpg


This picture was just during the water test.
1stWater-test4.jpg


And in service a little later on...
Operating_Sump.jpg
 
Last edited:

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%

New Posts

Back
Top