OP
OP
Leyth's 280
- Large Build
- Thread starter Leyth
- Start date
- Tagged users None
count krunk
Valuable Member
Mmm. I'm thinking 2x pumps split 3 ways each for your return. So you will need some return pumps that pack some horse power.
I don't remember if you got a sump already, but you will need one that will accommodate 2 returns.
You could also tie two sumps together, but that is a bit more complicated though. Be sure to get DC return pumps.
I don't remember if you got a sump already, but you will need one that will accommodate 2 returns.
You could also tie two sumps together, but that is a bit more complicated though. Be sure to get DC return pumps.
OP
OP
Leyth
Well-Known Member
Awesome, that’s exactly what I had planned. The sump I ordered will have two outputs on the return side. I am going to run 2x varios6 for the 6x returns. 3x returns for each pump. I opted for the varios6 because I already have one from my previous build.
They are 1760gph max each with controllers so that should help me tune them to help dial in the overflow.
What do you think?
count krunk
Valuable Member
I think that will work out nicely.
If you want to run any reactors or whatever I would use a separate pump as you don't want to muck about with the returns when it's split like that.
If you want to run any reactors or whatever I would use a separate pump as you don't want to muck about with the returns when it's split like that.
OP
OP
Leyth
Well-Known Member
Makes sense. Thank you
OP
OP
Leyth
Well-Known Member
One of the hardest parts of this hobby is being patient and let time pass before intervening. One strategy is to occupy your time with something else. This week we added another member to the family that will be occupying a lot of my time. Meet Zoa!
OP
OP
Leyth
Well-Known Member
I'm considering moving everything from my 17 gallon nano tank into the 280. The 17 has been running for about 7 years. Any disadvantages to doing this all at once that I am overlooking? Does it need to be a slow transfer over? Obviously, I wouldn't do it until the 280 is cycled. Thanks ahead
OP
OP
Leyth
Well-Known Member
Working on plumbing. I need to reduce the drain from 1.25" to 1", where is the best place to put the reducer? Closer to the sump or closer to the overflow? Before or after the drain valve?
OP
OP
Leyth
Well-Known Member
Thank you! I got the lights up as well. I’ll post a picture soon. They’re perfect! Thanks again!
SuperSaiyanTang
Active Member
- Joined
- Jul 20, 2013
- Messages
- 335
- Reaction score
- 183
Yeah man, would love to see them! When are you going to get the tank wet?!
OP
OP
Leyth
Well-Known Member
It is partially filled right now actually so I need to get a pic of that, but it’s in its ugly stages of cycling so I’ve been procastinating that haha.
OP
OP
Leyth
Well-Known Member
Few issues to deal with. I’ve got two small leaks that I’ve fixed temporarily with glue. I need to redo the plumbing in those areas.
Also, this external overflow can’t flow as much as I was hoping. My two varios 6 run at 2/5 speed. Maybe not an issue, I don’t know yet.
The other items on my agenda are to get 3 more Reefi Duos as the PAR I’m getting currently is around 60 on the sand bed due to the height of the tank. I also need to get more rock work.
Also, this external overflow can’t flow as much as I was hoping. My two varios 6 run at 2/5 speed. Maybe not an issue, I don’t know yet.
The other items on my agenda are to get 3 more Reefi Duos as the PAR I’m getting currently is around 60 on the sand bed due to the height of the tank. I also need to get more rock work.
SuperSaiyanTang
Active Member
- Joined
- Jul 20, 2013
- Messages
- 335
- Reaction score
- 183
What settings are you using?
