Lights fell in the tank

  • Thread starter Thread starter Mark3
  • Start date Start date
  • Tagged users None
BRS
Jump to Last
They were on, flashing all sorts of colors under water.... the fish had a underwater light show, they were dancing around them, they thought disco had come back in style.
 
WWC
Mark, if you purchased them using a credit card they might be able to use purchase protection. Sometimes it will cover water damage for electronics. That way you are not completely in the hole for repair costs. You will have to check the card member benefits for the specific card you use. Good luck!
 
littleclown said:
Mark, if you purchased them using a credit card they might be able to use purchase protection. Sometimes it will cover water damage for electronics. That way you are not completely in the hole for repair costs. You will have to check the card member benefits for the specific card you use. Good luck!
Click to expand...
Thanks, ... I will check it out.
I did use a card.
 
WWC
Hey, I just talked with AI ... not to bad of news,
Turns out that max would be $80 for a rebuild...but it might be less than that, and, they only charge for parts, no labor.

Makes my stupid accident easier to swallow.

Thanks AI ... I will be glad to do more business with you.
 
The same happened to me. Leave them off (do not test them) for at least 2 days. Take it apart to allow the parts to dry faster. I don't recall how long it took, but eventually mine dried and worked again just fine.
 
Rinse with fresh water and then put them in a large air container of dry rice for a week or two.
 
Avast
I am one for one in this area. Dropped a prime. Attempted to air dry and it was dead. Similar a year later with a hydra 26hd and I placed it is rice and silica packs from work, and its still alive.
Unfortunately you will get no help from manufacturer.
 
vetteguy53081 said:
I am one for one in this area. Dropped a prime. Attempted to air dry and it was dead. Similar a year later with a hydra 26hd and I placed it is rice and silica packs from work, and its still alive.
Unfortunately you will get no help from manufacturer.
Click to expand...
 
BRS
Mark3 said:
Hey, I just talked with AI ... not to bad of news,
Turns out that max would be $80 for a rebuild...but it might be less than that, and, they only charge for parts, no labor.

Makes my stupid accident easier to swallow.

Thanks AI ... I will be glad to do more business with you.
Click to expand...
NICE
 
Sorry to hear this... :(

Definitely don’t try to turn it on or dunk it in RO water.

Submerge the whole thing (both of them) in rice and let them sit for at least 4 days.

Im really hoping they will work again.
 
I had this happen with one of my lights. Maybe I got lucky, but, here's what I did...

I opened the light and allowed it to dry out. After it was completely dry, I used a fingernail brush and gave everything a thorough brushing to remove any salt.

Then I used rubbing alcohol in a spray bottle to rinse it off. My thinking was that rubbing alcohol evaporates quickly and won't cause damage.

I put everything back together after a day and it worked fine.
 
Deltec
vetteguy53081 said:
I am one for one in this area. Dropped a prime. Attempted to air dry and it was dead. Similar a year later with a hydra 26hd and I placed it is rice and silica packs from work, and its still alive.
Unfortunately you will get no help from manufacturer.
Click to expand...
No, I talked with AI ... They will fix for the cost of the parts only, No labor charge. With a max charge of $80 for a total rebuild. Much better than having to buy a new one.
 
Mark3 said:
No, I talked with AI ... They will fix for the cost of the parts only, No labor charge. With a max charge of $80 for a total rebuild. Much better than having to buy a new one.
Click to expand...
Did you happen to take a picture of the light show? Sounds kinda cool. AI's response was fantastic!

I will keep this thread in mind if I ever need to expand or resupply my lighing. Thanks for posting.
 
I was working on something on my hood one time, had my dad holding my Makita work light and he dipped the battery into the water. Brand new 5a battery, Makita was willing to replace it for free even though I told them what happened. Another time I was working on something and accidently pushed a Kessil up and off it's hook. Thank goodness the acrylic cover was on and did not fall in, it very easily could have. From then on the Kessils were zip tied to the hooks.
 
Tidal Gardens
Suohhen said:
I was working on something on my hood one time, had my dad holding my Makita work light and he dipped the battery into the water. Brand new 5a battery, Makita was willing to replace it for free even though I told them what happened. Another time I was working on something and accidently pushed a Kessil up and off it's hook. Thank goodness the acrylic cover was on and did not fall in, it very easily could have. From then on the Kessils were zip tied to the hooks.
Click to expand...
From what I learned from this tread that is Kessil has a flimsy bracket. :o
 
attiland said:
From what I learned from this tread that is Kessil has a flimsy bracket. :eek:
Click to expand...
Yeah the outside hooks are trash but the one i was using was the center ring. It's solid but I had them hanging from hooks so the tiniest bit of upword pressure and it popped right off. Now I have them screwed directly into C Channel aluminum.
 
Suohhen said:
Yeah the outside hooks are trash but the one i was using was the center ring. It's solid but I had them hanging from hooks so the tiniest bit of upword pressure and it popped right off. Now I have them screwed directly into C Channel aluminum.
Click to expand...
I don’t have Kessils but was connected it for future builds. I am surprised this can happen to a more expensive model than mine.
the light I am using would never fall from the bracket in fact it is actually hard to take it off.

 
Tidal Gardens
I soaked a radion light once and after letting it fully dry got myself some contact cleaner spray and gave all of the components a good spray. This was the only time I ever managed to save something that came in contact with my water.
 
The long and short of it is anything electronic dropped into saltwater while being powered will most likely randomly fry black ROM chips on the circuit board that run on various voltages controlled by resistors. ROM chips are super sensitive to overvoltage that occurs when the saltwater arcs the ROM chips

Zap > Fry > Dead

Drying it out in rice to absorb all the moisture....or..... cleaning the circuit board with rodi or 90% rubbing alcohol is futile bc most likely the ROM chip is already damaged beyond repair

These ROM chip have hard coded instructions in their memory to do certain things electronically.

Only takes 1 to fry to interrupt the circuit board 'system' and render the whole board useless.

Al will probably put in a new circuit board

cyber-2377718_640.jpg
 
Last edited:
BRS

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%

  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%

  • No.

    Votes: 26 37.1%

  • Other (please explain).

    Votes: 3 4.3%
See comments…

New Posts

Chewy.com
TCK Corals
Tidal Gardens
World Wide Corals
Dinkins Aquatic Gardens
Deltec
Nutramar Foods
Top Shelf Aquatics
New Posts
Back
Top