Looking for for a airline bottle adapter...

[Zeal]

Title. I’m looking for a bottle airline tubing adapter thingy. Not sure what to search for. I have the Jabeo doser and use the airline it comes with.... I wanna connect it top of the bottle and a Acrylic rod coming down

 

[Woodneers]

Do you want that exact piece? I have a container i was thinking about tearing apart or repurposing and its that exact container. i could ship you that excact piece or you could look into barb/PTC fittings

Or you could find something like this locally at home depot or order from BRS.

Mur-lok Stem Adapter Tube x Hose Stem

Mur-lok Stem Adapter Tube x Hose Stem Stem side slides into standard push connect fittings. Barb side is designed for flexible tubing like nylon or clear pvc. Mur-lok RO fittings are the only RO fittings that feature dual EPDM O-rings to ensure a straight leak free fit. These high quality...

www.bulkreefsupply.com

1/4" Push Connect Bulkhead Tank Adapter

The ¼" push connect bulkhead tank adapter is a great solution for connecting ro tubing through hard-walled barriers, such as sump walls or container lids/caps. These come with a plastic nut to secure the bulkhead to the container wall, but do not have a gasket. These are designed for above-water...

www.bulkreefsupply.com

You could use acrylic rod or just RO line on the PTC side and dosing line on the other end. put them in whatever bottle or container you would like.

 

[Zeal]

Do you want that exact piece? I have a container i was thinking about tearing apart or repurposing and its that exact container. i could ship you that excact piece or you could look into barb/PTC fittings

Or you could find something like this locally at home depot or order from BRS.

Mur-lok Stem Adapter Tube x Hose Stem

Mur-lok Stem Adapter Tube x Hose Stem Stem side slides into standard push connect fittings. Barb side is designed for flexible tubing like nylon or clear pvc. Mur-lok RO fittings are the only RO fittings that feature dual EPDM O-rings to ensure a straight leak free fit. These high quality...

www.bulkreefsupply.com

1/4" Push Connect Bulkhead Tank Adapter

The ¼" push connect bulkhead tank adapter is a great solution for connecting ro tubing through hard-walled barriers, such as sump walls or container lids/caps. These come with a plastic nut to secure the bulkhead to the container wall, but do not have a gasket. These are designed for above-water...

www.bulkreefsupply.com

You could use acrylic rod or just RO line on the PTC side and dosing line on the other end. put them in whatever bottle or container you would like.

What’s the first one for??

And the second one, wouldn’t airline tubing come out of it? Might not be a tight fit.

I have the dosing container and tried to remove that piece but it seems to be glued on from the inside

 

[Woodneers]

First one is just a hose barb with a 1/4" PTC (push to connect) section on one end so you can slide it into a PTC bulkhead fitting. I have used a handful of these for various things but just recently used them to set up an auto water change system. I drilled a hole in the lid of the reservoir then added the bulkhead fitting them added the barb. Barb end goes to the doser and the other end goes to the bucket via 1/4" ro line. In your case if you wanted it to look fancy you could use 1/4" acrylic just the same for the part that goes to the reservoir or bottle that you are using. I can take pictures tonight if need be.

Maybe you could do something like this? , use whatever container you choose.

 

[Woodneers]

These are handy too! https://www.reef2reef.com/threads/voss-bottle-wall-mount.741682/

 

[Zeal]

First one is just a hose barb with a 1/4" PTC (push to connect) section on one end so you can slide it into a PTC bulkhead fitting. I have used a handful of these for various things but just recently used them to set up an auto water change system. I drilled a hole in the lid of the reservoir then added the bulkhead fitting them added the barb. Barb end goes to the doser and the other end goes to the bucket via 1/4" ro line. In your case if you wanted it to look fancy you could use 1/4" acrylic just the same for the part that goes to the reservoir or bottle that you are using. I can take pictures tonight if need be.

Maybe you could do something like this? , use whatever container you choose.

The tubing he is using in that video is much thicker then the one I have.

I used to have that one but it wasnt tight on the doser and it would constantly come off.

Think I might just use my dosing container....