OK, time for another update on this tank. So much has happened since my last update that I'll try to remember everything that has changed.
Sump
I've moved the sump from under the cabinet into the basement directly below the tank. To accomplish this, I drilled holes for two 1" overflow PVC pipe and 1 1" return PVC. My wife was not thrilled with the idea but I made it as clean as I possibly could. Having the sump in the basement has the made the display tank incredibly quiet. I love it.
In order to pump back up from the basement, I switched return pumps to the Abyzz A200. The pump is an absolute workhorse. It's dead silent and pumps water to the display tank which is about 14' feet vertically, feed a carbon/GFO reactor, as well as feed a frag flat on the same system in the basement. My only concern is that I don't currently have a backup pump that can handle this load so I'll need to build a contingency plan soon in the event the pump needs to go offline.
Frag Flat
With the sump now in the basement, I added a 4'x3'x12" frag flat and have been using that for several months now to grow new colonies that are too small for the display. The flow in the flat is handled by a single gyre pump that keeps the flow ripping. As for lighting I stuck with the AquaticLife 48" T5/LED hybrid. This is the non-dimmable version. I added 3 Radio XR15 G4 Pros as well as the flat was primarily growing acros. With this setup, I had no problem hitting 400 PAR in the middle of the flat and the ends were perfect for low/medium light corals.
Nutrient Export
With the increase in water volume and bioload, I switched skimmers from the little guy I had running on the system to a Royal Exclusive skimmer. I got the skimmer from a friend and after changing the pumps to properly match the bioload in my tanks, it has been running flawlessly. I thought my previous skimmer was pulling gunk, which it was, but this is on a whole new level. I now see why there is such a thing as higher end skimmers in our hobby. Some just work better consistently for longer periods of time. The air draw alone is night and day with this new skimmer. I can now run the airline outside and boost my pH dramatically. During the day the pH will peak at 8.35 and at night drop to 8.1. This is something I could never do with the old skimmer or even by dripping kalk which I tried at one point.
Flow in the Display
Still running 2 MP40s on the back wall and that has provided all the flow I've needed for a while until some of the acros started getting bigger. I just added the Red Sea ReefWave 45 to the far end to push water back towards the overflow and create more of a randomized turbulent flow pattern. So far I like it but I've just connected it tonight so time will tell. My first impressions is that this pump is amazing. The build quality seems nice. It pushes a ton of water across the tank and is extremely quiet. For how much water it moves, it's more quiet than my MP40s.
Lighting in the Display
I'm still using 2 Kessil AP700s as the primary light source for the display. I've added 2 ReefBrite XHO Actinic bars for supplemental light and have gone away from T5. There was nothing wrong with the T5 fixure, I just wanted to try to go all LED and I like the way the corals look under the ReefBrites. The 80/20 light bar was also replaced by a canopy. I always thought that a canopy made a fish tank look too bulky and that the look of a rimless tank is more sleek. That's probably still true, but the benefits of the canopy outweigh the aesthetics in my new found opinion. I no longer have the light spill in the room which allows me to sit on the couch and not have light in my eyes when I'm enjoying the tank. I also find that the canopy focuses your vision on the tank in a way that it didn't before. As a room divider peninsula tank, the canopy really makes a clean separation of the two ends of the room.
Aquascape
I must have just piled rocks into a wall when I first setup the tank. Maybe I was lacking creativity at the time or maybe I was adhering to the old pound per gallon rule but the aquascape was feeling a little dated. Over the years as the corals grew, I lost a lot of the flow characteristics that I had in the beginning and ran out of room for new corals and growth. It was time for a change. I pulled all the old rock and put it in the frag flat. All the frags that I had been growing had turned into mini colonies and found a home in a newly re-scaped display tank. The new scape is half the height of the last scape with more branch-like and overhand qualities. There's more swimming room for open water fish and I've added only corals that I'm in love with. The most important thing is that I've left room for corals to grow and have decided that I don't want giant colonies in this tank. Rather, I'd like more mini colony sized acros in this now SPS dominant tank. When I started this tank, I couldn't grow an acro to save my life; and whereas I'm still confused on some, I can keep them going now. Maybe the tank has gotten more stable with the calcium reactor?
Calcium Reactor
I switched from 2Part dosing to a calcium reactor made by AquaMaxx. It's the middle sized reactor with the extra chamber for gassing off CO2. It's fed with a Kamoer STP wifi controlled peristaltic pump. That pump has been great for me as I had problems early with the Ecotech Versa. I'm sure Ecotech has resolved some of the early issues with the Versa but the timing of the version 2 of the Kamoer made the switch a no brainer for me. I still run the Neptune Trident to run testing for Alk, Calcium, and Mag and the calcium reactor keeps the system currently running at an average alk of 8.6 with a sway of only .2 dkh.
I'm sure I'm missing more stuff that I've either added or removed from the system, lessons learned, or things I would definitely not do again but that's enough for tonight. I'll be sure to add some pictures of the system before I took it down and replaced the aquascape as well as some shots of the basement build out and frag tank. Happy reefing!