Lunar Sim

[markak]

How do you hook the Lunar Sim to the Aqua controller Jr? The only plug on the controller is the one that the Temp probe is in ,and that is much smaller than the cable that came with the Lunar module, what looks like a reg phone jack. I have a VDM but the plug on that is a bigger plug which looks like a ethernet cable. Is it compatable with the Jr?

 

[revsgirl]

Not sure on that one.. bump for someone who may know..

 

[RussM Verified Sponsor]

You said AquaController Jr, but since you also mentioned having a VDM, I'm assuming you meant Apex Jr. You cannot connect a legacy module like that to the Apex Jr. Older peripherals can only be connected to Apex and Apex Lite models.

 

[markak]

My bad it is a Apex Jr. It wasn't compatible, sent them back, had to get a LSM module with 4 leds. And not quite sure I like the color of the LEDs they have. They have more white than blue show to them. Maybe I will get use to them.

 

[markak]

Brings another queston to mind. Can the Lunar lights(LSM) be put on a profile setting? I tryed, but the Outlet setup won't accept it. Keeps coming up error.

 

[RussM Verified Sponsor]

Brings another queston to mind. Can the Lunar lights(LSM) be put on a profile setting? I tryed, but the Outlet setup won't accept it. Keeps coming up error.

Yes, it can. What sort of error? Did you define the profile before trying to use it in programming?

 

[markak]

Yes: here is the profile>>>PF#1 ramp 180 min> start Intensity 0 end int 50 Outlet setup If Time 21:00 to 24:00 Then PF#1 (on and ramp from 9pm to 12am 0% to 50%)
PF#2 ramp 0 min >start int 50 end int 50...Outlet setup If Time 24:00 to 02:00 Then PF#2 (12am to 2am staying at 50%)
PF#3 ramp 60 min> start int 50 end int 100... Outlet setup If Time 02:00 to 03:00 Then PF#3 (2am to 3am ramp up to 100%)
PF#4 ramp 0 min> start int 100 end int 100... Outlet setup If Time 03:00 to 05:00 Then PF#4 (3am to 5am staying at 100%)
PF#5 ramp 60 min> start int 100 end int 50... Outlet setup If Time 05:00 to 06:00 Then PF#5 (5am to 6am ramp down 100% to 50%)
PF#6 ramp 60 min > start int 50 end int 0... Outlet setup If Time 06:00 to 07:00 Then PF#6 (6am to 7am ramp down from 50% to 0%)
...Outlet setup If Time 07:00 Then OFF
Do I need to put ON in the first line at 21:00 (9pm) then PF#1?
It is asking for ON or Off on the error line
Is this right? Also when I try 24:00 it says error, but if I use 23:59 it will take it, is this normal? I programed my Blue and White LEDs in this manner with no trouble. Anything is helpfull. Thanks, Mark