Manual for Coral Box Moon Led

[Christian_N]

I have Iphone also tried that on it not working

Ok.. when you press the reset button on the LEDs you hold it until it flashes green twice?
When you choose search network you need to count to twenty and the press stop if you let it search to long it wont work. This is a really big miss by Coral Box.

 

[Pain]

I tried that too not working also
I really don't know what's the issue with this.

 

[Christian_N]

This is really weird

And you’r sure that you search for the 2,4ghz band on the router? Just trying to exclude this.. I had a big issue with this before I found out that they don’t work with 5ghz band.

 

[Pain]

And you’r sure that you search for the 2,4ghz band on the router?

My router support both 2.4GHZ and 5GHZ.

How can i connect the LEDs with the router?
Should i make open channel for the LEDs ?

 

[Christian_N]

And you’r sure that you search for the 2,4ghz band on the router?

My router support both 2.4GHZ and 5GHZ.

How can i connect the LEDs with the router?
Should i make open channel for the LEDs ?

Then there should not be any problem with the router.

If you have reset the LEDs so they flash green twice they should be in router mode. When you add wi-fi connection under wireless in the app are you entering the name of you’r 2,4ghz wi-fi? After that you press connect count to twenty and press stopp. After that you should be able to go back and hit search device in the wireless meny. The LEDs should appear when the meter gets to 100% and they should be visible separetly with the name of each light printed on the back of them.

 

[Pain]

Then there should not be any problem with the router.

If you have reset the LEDs so they flash green twice they should be in router mode. When you add wi-fi connection under wireless in the app are you entering the name of you’r 2,4ghz wi-fi? After that you press connect count to twenty and press stopp. After that you should be able to go back and hit search device in the wireless meny. The LEDs should appear when the meter gets to 100% and they should be visible separetly with the name of each light printed on the back of them.

For example my router wifi name is Aqualeds,

After rest the LEDs,
LED 1 name B220
LED 2 name A81D
LED 3 name A872

from the mobile first thing i have to go to WIFI setting and connect to LED1 B220 after that i have to go to the app and chose "Add WiFi connection" here what should i chose B220 or Aqualeds?

 

[BobbyBPG]

I'm swedish and my english might not be some so good. but I hope most of this text is worth reading anyway.

When I bought new lighting (Coral Box Moon LED) for my new aquarium , I thought about a better manual on how to connect these to router if you want to be able to control multiple at the same time. Or if you just want to use one.


1. Unpack your lighting, mount it on the edge of the aquarium with a gooseneck bracket that comes with or hang it up. Both gooseneck and bracket for hanging included.


2. Connect the lighting with the supplied transformer.


3. Download the Aqua Led app in the App Store or Google Play Store.


4. NOTE!! The following steps are if you have one lamp or if you want to control each lamp separately!! Continue to step 7 to connect more lights via your router. Be sure to have the wi-fi plug on your phone or tablet. Then go to the wi-fi settings in your phone or tablet and search for the lamp. The name of the lamp is on the back of it just where the gooseneck bracket is, select it and connect.


5. Launch the Aqua Led app you previously downloaded.


6. Select the "Wireless" tab in the top left. Then select "Search for device" if you only have one lamp you want to control. After a while, your lamp will appear in a list below. Check the Box on the left side and you are connected. After this you can go back to the main page of the app and either choose the button with the finger for manual settings or the button with the clock to program up to 24 points at a time and how many percent of the six different channels will light up.


7. This step is for those who want to connect more than one lamp via a router and have the same programs on them!! You must then press the reset button on the lamp for 10 seconds (see image where it is). The green LED on the front of the lamp should flash twice and then vary between orange and green. You must do this on all lamps you want to control via your router.


8. Launch the Aqua Led app you previously downloaded.


NOTE!! Check your router!! If you have a router that transmits on two different bands (2,4ghz and 5ghz), it only works at 2.4ghz!!


9. Select the "Wireless" tab in the top left. Then select "Add wi-fi connection". Select the network connection you want to use and click "Connect" after twenty seconds press "Stop" and return to "Wireless." There you now choose "Search for device". If you now have three lamps then all of these will come up after a while. Click the checker for each lamp and you will now be ready to program the lamp as you want it.


Have fun!!

Christian

Got these lights and for the life of me couldn't find out where to synch them anywhere online. I'm going to try now thanks!

 

[Christian_N]

For example my router wifi name is Aqualeds,

After rest the LEDs,
LED 1 name B220
LED 2 name A81D
LED 3 name A872

from the mobile first thing i have to go to WIFI setting and connect to LED1 B220 after that i have to go to the app and chose "Add WiFi connection" here what should i chose B220 or Aqualeds?

Ok... I think you’re doing it the wrong way

What you need to do is that you have the phone connected to you usual wi-fi. Do not connect to any of the LEDs in the phones wi-fi settings. That’s only if you want to connect to them separetly.

If you have reset the LEDs so they have flashed green twice, then you’re in the ”router mode”. After this you should start the Aqua Led app, choose wireless, then add network (enter the name of your 2,4ghz network), search for it for 20 seconds, then press stop, then press the back button, and press search for device, Now your LEDs should appear when the search is done.

/Christian

 

[Christian_N]

Got these lights and for the life of me couldn't find out where to synch them anywhere online. I'm going to try now thanks!

Hope you get them to work!

 

[Pain]

Ok... I think you’re doing it the wrong way

What you need to do is that you have the phone connected to you usual wi-fi. Do not connect to any of the LEDs in the phones wi-fi settings. That’s only if you want to connect to them separetly.

If you have reset the LEDs so they have flashed green twice, then you’re in the ”router mode”. After this you should start the Aqua Led app, choose wireless, then add network (enter the name of your 2,4ghz network), search for it for 20 seconds, then press stop, then press the back button, and press search for device, Now your LEDs should appear when the search is done.

/Christian

Dear Christian,

I have tried your steps also it's not showing when i make a rest for 4 seconds the SSID name shows in the connection list when i try to get in the router mode for 14 sec the SSID disappear from the list.
Why it's really hard to setup these lights together

 

[BobbyBPG]

Hope you get them to work!

I couldn't quite figure it out they are on separate tanks so it's not the biggest deal I would just like to have them in sync.

 

[cameronh]

Dear Christian,

I have tried your steps also it's not showing when i make a rest for 4 seconds the SSID name shows in the connection list when i try to get in the router mode for 14 sec the SSID disappear from the list.
Why it's really hard to setup these lights together

What he is saying is correct, you have to time it just right lol. It takes some time to get used to it and how they operate but after that it's all a cake walk.
Finally got mine to stay on past 12am lol.
I should have known the setup would be just like kessil but didnt know you had to put in two empty times in a row to get them to stay off after 3am.
Just keep with it man. What he is telling you is correct, i mean......just look at his lights haha.
Anywho, hope you get them working man. They really are good lights.

 

[Pain]

Dear Christian,

Is it possible if you can make a detailed video tutorial for the router setup?
That's will helps a lot for everyone wants to run router mode.

 

[Christian_N]

Dear Christian,

Is it possible if you can make a detailed video tutorial for the router setup?
That's will helps a lot for everyone wants to run router mode.

I’ll see if I can fix a video on how I got it to work tomorrow. Just got home here and up early tomorrow morning.

 

[Christian_N]

What he is saying is correct, you have to time it just right lol. It takes some time to get used to it and how they operate but after that it's all a cake walk.
Finally got mine to stay on past 12am lol.
I should have known the setup would be just like kessil but didnt know you had to put in two empty times in a row to get them to stay off after 3am.
Just keep with it man. What he is telling you is correct, i mean......just look at his lights haha.
Anywho, hope you get them working man. They really are good lights.

I had the same problem when I first programmed my LEDs. Woke up and saw the light still on in the tank, still half asleep I couldn’t understand why the light was still on but after some thinking I understood that I needed to program an empty timeline to start with and one to end with.

 

[Pain]

I’ll see if I can fix a video on how I got it to work tomorrow. Just got home here and up early tomorrow morning.

Hello My friend, is there any update regarding the video ?

 

[Christian_N]

Hi all!

Sorry for the delay on the video. It’s on the way. I would have done it sooner but ended up operating one of my feet so everything got put on hold for some time. But now I’m back and hopefully will have the video ready this week!

/Christian

 

[DesertReefT4r]

Has anyone taken PAR readinhs wirh theses lights???

 

[Richard Cross]

I'm having issues connecting my 2 fixture to wifi router, it is 2.4ghz, I push the reset button on lights for 14-15 sec till 2 green led flash then it goes into flash orange and green back and fourth. I add wifi, I've tried push stop after 20sec and search I've tried 30sec and search and I've tried letting the add finish but no luck. The light never shows up on the network

 

[Christian_N]

I'm having issues connecting my 2 fixture to wifi router, it is 2.4ghz, I push the reset button on lights for 14-15 sec till 2 green led flash then it goes into flash orange and green back and fourth. I add wifi, I've tried push stop after 20sec and search I've tried 30sec and search and I've tried letting the add finish but no luck. The light never shows up on the network

Hi!

Just to start. Have you tried connect to each LED separatly? Just wondering if that work.