Manual for Coral Box Moon Led

[Richard Cross]

I have tried and neither show up separate either

 

[Christian_N]

I have tried and neither show up separate either

Ok. But when you want to connect seperatly you can’t be in the wi-fi mode. Then you need to press the button again and search for the light in the wi-fi settings on your phone/tablet. Just making sure that this part would work for you Hope you understand what i mean?

 

[Richard Cross]

Yes it works fine if I do it direct. But I need them both to connect to the router to control together and neither will connect

 

[Retro Reefer]

Thinking about trying these lights out.. following

 

[Christian_N]

Yes it works fine if I do it direct. But I need them both to connect to the router to control together and neither will connect

Hi Richard

Did you solve it with the LEDs?

 

[Retro Reefer]

Any pictures of these in operation on anyone else’s reef? Im considering using two of these mounted in a 4 bulb t5 hybrid fixture on my 40 breeder..

 

[Richard Cross]

Hi Richard

Did you solve it with the LEDs?

Still no luck. I programmed them individually but have to say I would never recommend this company to anyone. The customer service has been horrid and no help at all. They do look great and perform awesome lots of growth under them. But poor customer service kills a brand.

 

[Richard Cross]

Any pictures of these in operation on anyone else’s reef? Im considering using two of these mounted in a 4 bulb t5 hybrid fixture on my 40 breeder..

Here's a pic of a single one over and 18"x18" cube. On 40% they get alot brighter but started to cook coral at 60 so turned them down. They never get hot and they perform awesome. But with the customer service issues I feel like youd be better off going with 2 AI Primes. I tried to give this company the benefit of the doubt and give a non big box company a shot. But they shot themselves in the foot not trying to help me. I even had 2 lfs convinced into buying 10 a piece but promptly told them to look else where.

 

[Retro Reefer]

Not sure if you have checked out the videos on YouTube, there are a few on set up

 

[Richard Cross]

I've watched every video. And emailed the company back and forth and they said theres an issue with the lights or the network. My other 4! Worked fine. These latest 2 are junk and they didnt offer a single thing.

 

[Retro Reefer]

Did you buy them from reef breeders? They offer a 1 year warranty.. think I’ll probably still give them a try as AI customer service is supposedly horrible as well. I see a few very advanced European reefers using and indorsing them.

 

[Christian_N]

Still no luck. I programmed them individually but have to say I would never recommend this company to anyone. The customer service has been horrid and no help at all. They do look great and perform awesome lots of growth under them. But poor customer service kills a brand.

I’ll ser if I in the near future can fix a video of how I get my four to work together.
Have you bought yours direct from fish-street?

 

[Christian_N]

I've watched every video. And emailed the company back and forth and they said theres an issue with the lights or the network. My other 4! Worked fine. These latest 2 are junk and they didnt offer a single thing.

I’ve read somewhere that you only can connect 4 together. But don’t remember where. Can be totally wrong also.

 

[danilo p marcelino]

Hello, I'm Brazilian, so sorry for the English.

I have the same problem a coral-box led mon on the wifi one works very well when I set the second it stops responding on the network I believe it must be because the two have the same name for the same router having end. from different macs

 

[CarlosG]

Today i have received my 3 LEDs and i have setup them separately,

How can i control all of the three LEDs together, as i have noticed also all of them running on the same IP address 192.168.0.99 can i change the IP for them or what should i do.

Please need your assist on this.

Hello, I dont know if you solved it, I had the same problem with two LED’s, the IP address was 192.168.0.99. you can follow next steps

1. In your device(cellphone or tablet) Search wireless and connect with AquaLed-0001 with the pass 12345678
2. Launch your app Aqua Led
3. Search for devices
4. Select AquaLed-0001
5. Put the LED router mode AquaLed-0001 (press reset button 15 seconds)
6. Disconnects wireless (AquaLed-0001) from your device (cellphone or tablet)
7. Connect your wireless internet connection to your device
6. Return to app Aqua Led
7. Add WiFi connection
8. Put SSID and password
9. Start connect (wait 30 seconds) and click back
10. Search devices.
11. You will have 2 AquaLed-0001
12. Select the new with different IP address
13. Delete 192.168.0.99

You need repeat the steps with other LED’s.
Please, let me know if it works to you.

Sorry for my English

 

[jlagee]

Hi! This looks to be a long running thread!

I have been running one of these over my 29 biocube for a few years with incredible results!

Just about to upgrade to a 75 g acrylic - 60”l x 16” h x 18”d. I bought two more to run a total of three over it.

I’m not sure if anyone can help me sync the three of them on my current schedule? I can get hw app to recognize the new lights, but when I try to connect - nothing :-(

 

[jlagee]

Current 29g

 

[jlagee]

Thinking about trying these lights out.. following

If you haven’t yet, BUY THEM. Awesome and powerful little lights - super easy to use!

 

[Retro Reefer]

If you haven’t yet, BUY THEM. Awesome and powerful little lights - super easy to use!

Been running one now for a couple months in my t5 fixture.. I really like the light a lot just wish it had royal blue LEDs, the blues it has are to light for my taste and tend to wash out colors.

 

[K-Philly]

I’m still searching for PAR readings on this light? Anybody have any?