Did ask the question on the ‘general’ thread and was advised to ask on here too.
Is this receding/bleaching. I was told it likes a lot of light so it is at the top of the tank almost directly under the LEDshave a reef photon and run 90% blues and 50% whites. My water measurements are:
Salinity - 1.025
Alkalinity- 9 dkh
Calcium - 423ppm
Magnesium - high at 1500 but it seems to stay there consistently
Phosphate - 0.25
I run a reactor with ‘carbon dosing pellets for nitrate and phosphate degradation’. Instructions say put a maximum Of 200ml of the pellets per 100l - as I have a Reefer 170 that would be a maximumof circa 300ml and I’m running at 200ml. Should I increase or use another form of phosphate Reducing media?
Any guidance would be appreciated.
Is this receding/bleaching. I was told it likes a lot of light so it is at the top of the tank almost directly under the LEDshave a reef photon and run 90% blues and 50% whites. My water measurements are:
Salinity - 1.025
Alkalinity- 9 dkh
Calcium - 423ppm
Magnesium - high at 1500 but it seems to stay there consistently
Phosphate - 0.25
I run a reactor with ‘carbon dosing pellets for nitrate and phosphate degradation’. Instructions say put a maximum Of 200ml of the pellets per 100l - as I have a Reefer 170 that would be a maximumof circa 300ml and I’m running at 200ml. Should I increase or use another form of phosphate Reducing media?
Any guidance would be appreciated.

