Mp10 and Mp40....Sync/antisync at different speeds

[vipete1985]

I just bought an mp40 to add to my tank and I already had the mp10....I am wondering if they can be anti synced to run at different speeds and if anyone is familiar with how to get this done....I am running the reeflink controller with The EcoSmart live app....I have them anti synced and working well but I just can’t get the mp40 to do everything at a lower speed because it is too powerful....Anybody with experience please chime in....Thanks!

 

[hybridazn]

Yes you can adjust the flow separately. If using reeflink it should be really easy to do so.

 

[Crabs McJones]

I just bought an mp40 to add to my tank and I already had the mp10....I am wondering if they can be anti synced to run at different speeds and if anyone is familiar with how to get this done....I am running the reeflink controller with The EcoSmart live app....I have them anti synced and working well but I just can’t get the mp40 to do everything at a lower speed because it is too powerful....Anybody with experience please chime in....Thanks!

Unfortunately I don't know of a way to make the mp40 work at a lesser capacity than the mp10. Your talking like if the mp10 maxes out at 100% you only want the mp40 to max out at 50% or something similar right?

 

[vipete1985]

Yes you can adjust the flow separately. If using reeflink it should be really easy to do so.

I must not be seeing something or doing something wrong then

 

[vipete1985]

Unfortunately I don't know of a way to make the mp40 work at a lesser capacity than the mp10. Your talking like if the mp10 maxes out at 100% you only want the mp40 to max out at 50% or something similar right?

Correct!

 

[hybridazn]

You can even set the flow to do this without a reeflink or wxm. I'm not too familiar with the reeflink as I have an apex and run the wxm.

 

[vipete1985]

You can even set the flow to do this without a reeflink or wxm. I'm not too familiar with the reeflink as I have an apex and run the wxm.

Shoot man I’m looking everywhere for this info but I can’t find it...There is some stuff out there that explains how to do it on the apex but nothing with the reeflink

 

[Crabs McJones]

Unfortunately I don't know of a way to make the mp40 work at a lesser capacity than the mp10. Your talking like if the mp10 maxes out at 100% you only want the mp40 to max out at 50% or something similar right?

Correct!

You can even set the flow to do this without a reeflink or wxm. I'm not too familiar with the reeflink as I have an apex and run the wxm.

 

[hybridazn]

I believe @mdbannister has a reeflink. Any insight?

 

[ca1ore]

I do this with a MP40 and MP10 on my frag tank. Latter at 80% synchs to the former at 40% ..... but I also am doing it with the WXM module.

 

[Airwarf]

Shoot man I’m looking everywhere for this info but I can’t find it...There is some stuff out there that explains how to do it on the apex but nothing with the reeflink

Here is the Vortech full manual you can find on EcoTech's support page.

And here is the exact steps you're looking for after you've assigned Master and Slave to your Vortechs.

I don't have a reeflink so I'm no help there. But I'd say try setting it manually and see if it makes any configuration changes in your reeflink app. Then you could just modify that. idk, that was a guess.

 

[saltyhog]

Go to this screen under Vortech on Reeflink

Then click on the antisynch or synch or what ever mode you want to change and it should look like this

See the Max Speed bar which is set at 100% in my case, slide it to where you want it. You can set the master at 100% and the synch/antisynch at any where you want! Let me know if I need to and you can call me to walk you through it.

 

[vipete1985]

Go to this screen under Vortech on Reeflink

Then click on the antisynch or synch or what ever mode you want to change and it should look like this

See the Max Speed bar which is set at 100% in my case, slide it to where you want it. You can set the master at 100% and the synch/antisynch at any where you want! Let me know if I need to and you can call me to walk you through it.

Awesome man you are a life saver rn...Thank you so much