ohioboy706
Active Member
Is anyone still using this for limewater? What dosage are you using it at? Picked up some and wanna give it a shot.
mrs wages pickling lime
- Thread starter ohioboy706
- Start date
- Tagged users None
TwistedTiger
Active Member
Many refers still use it. Use it just like you would kalk from a reef store. Mix it according to your tanks needs.
I use it... There are several ways to dose kalk, so finding the one that's best for you is a good idea. I'm using a 1 gallon jug and air line tubing to drip in my 29, and using a two little fishes kalk reactor linked into my auto topoff in my 40.
Mike J.
2500 Club Member
Same here. My clams grew a lot faster when I dosed kalk.
mfinn
likes zoanthids
I use it.
I add 2 heaping tablespoons to a 5 gallon bucket of ro/di water, mix it for a 1/2 a minute.
Let it sit for 24 hours and take the clear liquid off the top and add it to my top off container.
I add 2 heaping tablespoons to a 5 gallon bucket of ro/di water, mix it for a 1/2 a minute.
Let it sit for 24 hours and take the clear liquid off the top and add it to my top off container.
jonny
Active Member
This is exactly the way I do it...people look at me crazy when I tell them though lol
Once the water becomes fully saturated that's all the kalk it will hold. There are ways to increase the saturation, like adding vinegar. The reason some settles in the bottom is because the water has become saturated. I throw 2 tsp in a gallon jug with rodi water and shake it for about 30 seconds. I try to do it the night before, but most of the time I'm just about out so I don't have time for that. So most of the time it sits for 5 minutes and i put it online. This probably isn't the best method (or even recommended) but that's how I do it.
inkedsparkster
Active Member
New to reefing and this will be on my list of things to try for my tank.
Randy Holmes-Farley
Reef Chemist
Staff member
Super Moderator
Excellence Award
Expert Contributor
Article Contributor
R2R Research
My Tank Thread
Sounds good.
Limewater is the only calcium and alkalinity additive I've added to my tank for 19 years.
Good luck!
Limewater is the only calcium and alkalinity additive I've added to my tank for 19 years.
Good luck!
Why I don't use it in my ATO? Afraid of overdosing my tank 
ATO doesn't add the same amount of water every day.
ATO doesn't add the same amount of water every day.
Is it possible to manually dose the Mrs. Wages in place of a 2 part? Yes I'm looking for any easier, softer way-lol.
Yes I'm looking for any easier, softer way-lol.
How do you know when you have saturated the water with enough Limewater? I want to start dosing Calcium and Alkalinity again but before make sure I understand the mixture.
I am using BRS Kalk powder but would use the pickling lime you suggest.
I am using BRS Kalk powder but would use the pickling lime you suggest.
jservedio
Active Member
Spring for spending the extra $5 and get higher purity Calcium Hydroxide from BRS for $12.99 per gallon! I know Mrs. Wages is perfectly safe, but I always prefer adding a few impurities as possible to my tank in addition to what I intend to add.
Randy Holmes-Farley
Reef Chemist
Staff member
Super Moderator
Excellence Award
Expert Contributor
Article Contributor
R2R Research
My Tank Thread
Is it possible to manually dose the Mrs. Wages in place of a 2 part?
Only if you need a very small amount, or you want to make many manual additions each day.
Adding 1.4 dKH of alkalinity in limewater all at once is way too much, boosting pH instantly by 0.6 to 0.7 pH units. Adding 0.25 dKH worth is likely OK.
Of course, a cheap dripper can work well, but needs refilling pretty often.
Randy Holmes-Farley
Reef Chemist
Staff member
Super Moderator
Excellence Award
Expert Contributor
Article Contributor
R2R Research
My Tank Thread
Either of those is a fine choice.
Adding about 2 teaspoons per gallon of fresh water is about saturation. You can add more if you want, and just leave the excess solids to settle out and be used next time. I do that a lot.
You can also measure conductivity. Saturation is around 10 mS/cm.
