My electrical setup, any suggestions?!

[Dylan7huskies]

Hey guys this is what I just set up for my electric running to my innovative marine 20. Any suggestions to help keep it less of a fire hazard??

 

[Ron Reefman]

Dylan, as ugly as that looks, it's way better than mine!

 

[Paul B]

Mine to. And I'm an electrician.

 

[madweazl]

I should have taken a picture of my stand before I cleaned it up a couple days ago; talk about a rat's nest! Only took me a year and change to get all the cords, power supplies, and ballasts off the floor LOL.

 

[Ron Reefman]

Most of mine are in a plastic tub to protect them if water gets on the floor... again! ;Hilarious;Hilarious;Hilarious

 

[Homebrewer]

I'd make only one suggestion, put a little more slack in the power cords running to the bottom power strip. It appears that the cords are running downhill. If they get wet, water could run to the power strip and cause a short/trip/etc. Just another inch of slack will provide a drip loop so that if it does get wet, water will run to the lowest point on the cord, which would be away from the power strip.

 

[Dylan7huskies]

I'd make only one suggestion, put a little more slack in the power cords running to the bottom power strip. It appears that the cords are running downhill. If they get wet, water could run to the power strip and cause a short/trip/etc. Just another inch of slack will provide a drip loop so that if it does get wet, water will run to the lowest point on the cord, which would be away from the power strip.

I don’t know how I didn’t see that! Thank you!!!

 

[Paul B]