Need expert help with zeovit sps tank!

  • Thread starter Thread starter Ross
  • Start date Start date
  • Tagged users None

Ross

Active Member
View Badges
Joined
Mar 15, 2013
Messages
285
Reaction score
227
Location
Lubbock Tx
Rating - 0%
0   0   0
Tank set up: 65g tank with 15g Sump. 65g net total water volume. Lighting is 4x39w LED powermodule. Filtration is SRO skimmer and zeovit reactor.

Zeovit details:

I have been running zeovit since about June. I started off with the recommended dose of 600mL zeostones, but my corals got very pale and began losing tissue. I have since reduced and I am running CUNAreefer's recommended dose:

110mL Zeostones
0.2L Activated KZ brand carbon
2 drops sponger power 3 times a week
2 drops Zeobak 3 times a week
4 drops CV nightly
2 ML K balance per day to keep up with calcium demand

Actual parameters:
Alk: 6.7
Calcium 410
Mag 1260
Phosphates 0.03
Nitrate 2
Potassium 390

Now for my problem! I am experiencing tissue loss mainly from the tips, that you would normally associate with an alk spike or alk burn. I am 100% certain it is not alk burn. This particular problem seems to have gotten worse since I reduced zeovit.

I have been testing alk almost daily. I am using a hanna alk tester and verifying with salifert. I am also 100 % sure it is not pests.

I have several pieces that are looking outstanding, great color, growth and PE are greatly improved since reducing zeovit about a month ago. I have other pieces that are barely haning on and slowly but steadily losing tissue.

I have read until my eyes bleed and I cannot figure out why. I have seen theories inculding the following:

1. allelopathy as I do have some aptasias in the tank, but I just treated them.

2. increased phosphates due to the reduction in the zeovit media.

3. Too much light. I have raised my light up a foot above the tank. On one piece in particular (ORA scribbs) only the top of the acro is losing tissue, while the under side of the same branch still has tissue. I dont know why this issue would begin now though, because I've had the same light over the tank for months.

4. Excessive carbon dosing (althought zeo recommends 0.25mL and I am only dosing 0.15mL)

Sorry for the poor pictures, I'm taking them on an iPhone



This piece use to be purple and green, now it has burnt tips and almost no PE. the only polyps visible are around the base of the coral in the shade.

Here is the same piece on the left. Notice the pink lemondade and other battle corals piece on the right are both showing good color, encrusting, and have PE.


Here is an ORA scripps. This piece use to grow insanely fast. Now it is barely hanging on. The tissue on the top of it that gets the most light is slowly peeling away. The coral still has tissue on the under side of the same branches.



Here is a humilis. It use to be green all the way to the tips. The tips first turned purple and now have been receeding. I have cut them back several times after algae takes over the tips. It continues to recede slowly.


In this picture you can see the humilis, the purple acro, and the ORA scripps that are all doing poorly.



This is the right side of the tank. As you can see the RBTAs are happy, the xenia grows like crazy, they chili pepper monti and sunset montis are growing, zoanthis are happy, etc.



This pocillopra and sunset monti are growing well. The purple/ green polyp acro to the left has burnt tips that you can see in the picture.

 
Someone on a zeovit page mentioned to me that others had this problem with high barium. Here are my triton results from a test within the last couple weeks!





Here are my triton results. Does anything stand out? I'm getting very frustrated and still losing tissue.
 
I don't really see any reason for the issues, so I'm not sure what it is.

I don't think the barium is the likely cause based on others sometimes having it and not seeing an issue.
 
How old the system is? Is it started with dry (not live) rocks?
 
The system is about 3 years old. The rock has been established the entire time.

In an act of desperation today I tore my sump apart to inspect my pumps and look for anything out of place. I found this little guy down there! It definitely wasn't suppose to be there. It's a small 3/8" black wood screw, not sure what it's made of or coated in. It didn't appear to have any rust on it. Could this be what was causing my issues??

%5BURL=http://s53.photobucket.com/user/Ros...0-C34C-45F8-A638-91040A253B4C.jpg[/IMG][/URL]
 
What is the flow through your zeolites? The suggestion is no more than 100gph per liter of zeolite, you are using 110ml of zeolite so would that be no more than 10gph? Do you change them at the recommended intervals?
This is the only thing I could think of that may be off with the zeo. Some corals are just more sensitive than others and that could be why it is effecting these ones and not others.

The only other thing I can think based on your info is whatever you treated the aptaisa with.
 
The system is about 3 years old. The rock has been established the entire time.

In an act of desperation today I tore my sump apart to inspect my pumps and look for anything out of place. I found this little guy down there! It definitely wasn't suppose to be there. It's a small 3/8" black wood screw, not sure what it's made of or coated in. It didn't appear to have any rust on it. Could this be what was causing my issues??

%5BURL=http://s53.photobucket.com/user/Rossthehoss/media/aqiarium/9A263900-C34C-45F8-A638-91040A253B4C.jpg.html][/URL]

The pics didn't work, but it wouldn't matter. It might be a concern and I'd certainly remove it. But we can't figure chemical content from a picture. lol
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top