Need Help - Need Pump for Old Vertex Skimmer

[Billyjose4]

I was gifted a (mostly unused) Vertex Aquaristik protein skimmer. I think this skimmer is from ~2010ish. Based on the measurements, I think it's the Gen-3 IN-250 model.
Vertex Skimmers

Q1: Can anyone find an owner's manual or any docs online for this skimmer?
Q2: Does anyone have a clue what pump I can buy for this? A DC pump?

I have a 225gal this (gifted) skimmer could be a great fit for... if I can figure out how to get it up and running.

 

[blaxsun]

Do you still have the old pump?

 

[Billyjose4]

No, they either lost it or chucked it.
They gave it to me free. Figured I could buy a skimmer pump and make it work.

 

[Billyjose4]

No, they either lost it or chucked it.
They gave it to me free. Figured I could buy a skimmer pump and make it work.

I was hoping to find something about this particular model online, but can't seem to find anything. I'm not even sure Vertex makes protein skimmers anymore.

 

[Billyjose4]

So I found an old thread in the old RC forums for "Vertex Skimmer club" and I think I have either the Gen-2 or Gen-3 IN-250 model.
The Gen-1 models seemed to require a 90 degree elbow fitting for an opening higher up on the skimmer body.
I measured my skimmer and I have a 1.25" opening that starts 2" off the base- which seems to align with the Gen-2/Gen-3 model. As far as I can tell.

I was considering (if it ever comes back in stock) the Varios-6S DC skimmer pump as a replacement pump. The specs seem close to the original, plus it gives me the DC options. The Varios-6S model has a 1.25" outlet, so I'm assuming that will fit the 1.25" opening on the skimmer body. Also comes with a bracket so can be side-mounted 90 degrees- so may not have to go full-blown MacGyver... if I'm lucky.

Thoughts? Crazy??

 

[TheDragonsReef]

You can use just about any pump rated for the same flow as long as you can fit a venturi to it

 

[George's reef]

So I found an old thread in the old RC forums for "Vertex Skimmer club" and I think I have either the Gen-2 or Gen-3 IN-250 model.
The Gen-1 models seemed to require a 90 degree elbow fitting for an opening higher up on the skimmer body.
I measured my skimmer and I have a 1.25" opening that starts 2" off the base- which seems to align with the Gen-2/Gen-3 model. As far as I can tell.

I was considering (if it ever comes back in stock) the Varios-6S DC skimmer pump as a replacement pump. The specs seem close to the original, plus it gives me the DC options. The Varios-6S model has a 1.25" outlet, so I'm assuming that will fit the 1.25" opening on the skimmer body. Also comes with a bracket so can be side-mounted 90 degrees- so may not have to go full-blown MacGyver... if I'm lucky.

Thoughts? Crazy??

I was wondering if you made it work.. I have an old vertex as well.. just thats mine its a wider body and I can't find any information about it I don't know what model is it or generation.. but I made it work with a varios 6 pump

 

[Ironwill723]

I was wondering if you made it work.. I have an old vertex as well.. just thats mine its a wider body and I can't find any information about it I don't know what model is it or generation.. but I made it work with a varios 6 pump

@George's reef