Need some advice about removing phosphates

WVReefJunkie

Valuable Member
View Badges
Joined
Jan 24, 2015
Messages
1,543
Reaction score
359
Location
West Virginia
Rating - 100%
7   0   0
I have a total water volume of 289 gallons, and have a phosphate level of 0.50 ppm with a Hanna low range checker. Checked RO/di water and it is 0.00 ppm. I have running gfo in a two little fishes Reactor. What should I do, I have gfo and phosguard I can use in the Reactor? I change gfo about once every three weeks.
 
Hey my friend I hope it will help you a little:

Nutrient Export

What do all algae (and cyano too) need to survive? Nutrients. What are nutrients? Ammonia/ammonium, nitrite, nitrate, phosphate and urea are the major ones. Which ones cause most of the algae in your tank? These same ones. Why can't you just remove these nutrients and eliminate all the algae in your tank? Because these nutrients are the result of the animals you keep.

So how do your animals "make" these nutrients? Well a large part the nutrients comes from pee (urea). Pee is very high in urea and ammonia, and these are a favorite food of algae and some bacteria. This is why your glass will always need cleaning; because the pee hits the glass before anything else, and algae on the glass consume the ammonia and urea immediately (using photosynthesis) and grow more. In the ocean and lakes, phytoplankton consume the ammonia and urea in open water, and seaweed consume it in shallow areas, but in a tank you don't have enough space or water volume for this, and, your other filters or animals often remove or kill the phytoplankton or seaweed anyway. So, the nutrients stay in your tank.

Then, the ammonia/ammonium hits your rocks, and the periphyton on the rocks consumes more ammonia and urea. Periphyton is both algae and animals, and is the reason your rocks change color after a few weeks from when they were new. Then the ammonia goes inside the rock, or hits your sand, and bacteria there convert it into nitrite and nitrate. However, the nutrients are still in your tank.

Also let's not forget phosphate, which comes from solid organic food particles. When these particles are eaten by microbes and clean up crews, the organic phosphorus in them is converted into phosphate. However, the nutrients are still in your tank.

So whenever you have algae or cyano "problems", you simply have not exported enough nutrients out of your tank compared to how much you have been feeding (note: live rock can absorb phosphate for up to a year, making it seem like there was never a problem. Then after a year, there is a problem).

So just increase your nutrient exports. You could also reduce feeding, and this has the same effect, but it's certainly not fun when you want to feed your animals :)
 
I have a total water volume of 289 gallons, and have a phosphate level of 0.50 ppm with a Hanna low range checker. Checked RO/di water and it is 0.00 ppm. I have running gfo in a two little fishes Reactor. What should I do, I have gfo and phosguard I can use in the Reactor? I change gfo about once every three weeks.

GFO and other binders deplete rapidly at high phosphate levels. Maybe less than a day. So I'd first replace it if you want to continue with that method.

But there are many good methods to pick and choose from:

Phosphate In The Reef Aquarium
https://www.reef2reef.com/blog/?p=3184
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top