Quick question, I just want to make sure I have the calculations correct. The bottle says water volume x desired ppm x .1261 = ?ml. So for me it’s 210 x 5 x .1261 = 132ml. That seems a lot but if the math is right then I’ll do it. Thanks!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Would you use the same equation when figuring out the dose you need. And do you have a link to the stuff you use?FWIW, you can buy food grade sodium nitrate from amazon. It has a purity assurance that Brightwell does not provide, and is much cheaper.
I'd typically suggest dosing 2 ppm a day for a while and see if nitrate becomes detectable 24 h later.
Would you use the same equation when figuring out the dose you need. And do you have a link to the stuff you use?
Awesome thank you! I keep bottoming out on a 350g system and brightwell is getting expensiveSame equation as Brightwell? No.
You make a solution however concentrated you want (up to the solubility limit) and dose it per a calculator like this one:
There are lots of suitable brands, such as Loudwolf.
You're welcome.Tagging along for the info and reference as I'm getting ready to start this . Thanks for all your help RHF

Ive been dosing NeoNitro in both of my 200g tanks (they were at 0.00 when i started) and after about 2 weeks started to hit around 1.0 - then it dropped again? Thinking about doing a double dose for a week to see how this works out but am a little cautious due to very clear directions on not dosing too much. Anyone have some experience in double dosing and for how long?

