KevinRosso
Community Member
- Joined
- Jul 26, 2017
- Messages
- 88
- Reaction score
- 21
- What state or country do you live in
- Massachusetts
Hey Everyone,
I have 60 gallon cube with a Tunze ATO setup to a 5 gallon reservoir. I'm looking to have the pump turn on every 6 hours for 30 minutes. I also want the ato to turn of if the main return is off and then wait 4 minutes after the return pump is on for the ato to start up. I'm looking to have the ato turn on for 30 minutes every 6 hours so that my rodi float valve will cut off my water supply accordingly and hopefully not have di creep. Here are my settings right now
Fallback OFF
Set 0
If Output Pump1_3_3 = OFF Then OFF
Defer 004:00 Then ON
If Time 00:30 to 01:00 Then ON
If Time 01:01 to 06:29 Then OFF
If Time 06:30 to 07:00 Then ON
If Time 07:01 to 12:29 Then OFF
If Time 12:30 to 13:00 Then ON
If Time 13:01 to 17:29 Then OFF
If Time 17:30 to 18:00 Then ON
Does this looks ok and do you think this will avoid DI creep?
I have 60 gallon cube with a Tunze ATO setup to a 5 gallon reservoir. I'm looking to have the pump turn on every 6 hours for 30 minutes. I also want the ato to turn of if the main return is off and then wait 4 minutes after the return pump is on for the ato to start up. I'm looking to have the ato turn on for 30 minutes every 6 hours so that my rodi float valve will cut off my water supply accordingly and hopefully not have di creep. Here are my settings right now
Fallback OFF
Set 0
If Output Pump1_3_3 = OFF Then OFF
Defer 004:00 Then ON
If Time 00:30 to 01:00 Then ON
If Time 01:01 to 06:29 Then OFF
If Time 06:30 to 07:00 Then ON
If Time 07:01 to 12:29 Then OFF
If Time 12:30 to 13:00 Then ON
If Time 13:01 to 17:29 Then OFF
If Time 17:30 to 18:00 Then ON
Does this looks ok and do you think this will avoid DI creep?
Last edited:
