New 9410

  • Thread starter Thread starter rtague
  • Start date Start date
  • Tagged users None

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Jump to Last
R

rtague

Active Member
View Badges
Joined
Feb 10, 2012
Messages
164
Reaction score
57
Location
new york
Rating - 0%
0   0   0
Hi Roger, just recieved the 9410 dc doc skimmer.Unlike the pics in the manual the tubing doesn't have the valve,it looks like it connects to the pump and to the top of the skimmer body,correct?,and you say 6" is optimum water level?
 
You dont need the valve the dc controller is for air adustment.
Mine is in 6.5" of water at 30% on the controller.
You will love this skimmer.
20190918_190555.jpg
20191109_085808.jpg
Excellent choice!
 
You know this is my first skimmer. Every time I see those "how to tune your skimmer" videos I have no idea what they're talking about. You mean you don't just put it in your sump, turn it on and dial the little blue knob to get the skimmate you want?
 
Quietman said:
You know this is my first skimmer. Every time I see those "how to tune your skimmer" videos I have no idea what they're talking about. You mean you don't just put it in your sump, turn it on and dial the little blue knob to get the skimmate you want?
Click to expand...
Exactly! There are so many threads and videos on how to "tune" your skimmer.
Couple of people said its toy like with the plastic they use.
I know a person who decided to try one and said he will never own another brand of skimmer.
They said no adjustment and the ease of changing the skimmer cup puts in a leage of its own.
 
The DC models do not include the air screw and I generally would advise against it. One of DC's benefits is the air/water ratio stays constant, with AC as you close off air, water flow increases. The manual covers both models and that is why it shows the screw, but if you look to the spare parts list you will see it is not a spare for the DC model. With that said, I have had a couple people add the screw to try to really fine tune it, but I don't really see the need. In general the lower the water level the stronger you can run the pump and that generally means better gas exchange, but typically expect the pump will be at less than 50% and possibly all the way down in a higher water level. For reference an AC model with air all the way open is the same flow as a DC one at 50%. You are correct on the silencer, the tube part goes nearer the pump, a lot of people do that upside down and then the weight of the silencer can lead to kinking.
 
Thanks everyone, so Roger,if I understand you correctly, the silencer with the short piece of tubing goes to the pump and the longer piece of tubing goes to the top of the skimmer body?
 
Hi Roger,just installed the 9410 today,unfortunately the pump is making a horrible grinding sound an surging every couple of seconds,I took the pump apart and tried different water levels from 6" -8" ,didn't help,any ideas?
 
Make sure the bushings are seated, there are two of these, one in the impeller cover and one down in the motor, they often come loose in shipping, they should be completely pressed into their sockets and not come out with the impeller. For the one on the bottom you will generally need a pen, or dowel or some sort of tool. Also be sure the air line is not kinked and no water is being drawn in to the air intake (this is a symptom of being too deep or the outflow pipe not being pushed in all the way), both tend to result in a lot of noise as a lack of airflow causes the needlewheel to get sucked into the front housing and rub. Also, please bare with me, I have to leave early to attend a funeral, if none of this solves it, PM me and on Monday I will get you a pump out.

Ceramic bearings, 1 ea. - Tunze

Hi-Tech für Aquaristik
www.tunze.com www.tunze.com
 
rvitko said:
Make sure the bushings are seated, there are two of these, one in the impeller cover and one down in the motor, they often come loose in shipping, they should be completely pressed into their sockets and not come out with the impeller. For the one on the bottom you will generally need a pen, or dowel or some sort of tool. Also be sure the air line is not kinked and no water is being drawn in to the air intake (this is a symptom of being too deep or the outflow pipe not being pushed in all the way), both tend to result in a lot of noise as a lack of airflow causes the needlewheel to get sucked into the front housing and rub. Also, please bare with me, I have to leave early to attend a funeral, if none of this solves it, PM me and on Monday I will get you a pump out.

Ceramic bearings, 1 ea. - Tunze

Hi-Tech für Aquaristik
www.tunze.com www.tunze.com
Click to expand...
Thanks Roger will do,sorry for your loss
 
Quietman said:
Sure, why not? Run it about 1/4-1/3 speed does just fine.
Click to expand...
I was just surprised as Tunze never recommends oversizing skimmers because they have difficulty forming a foam head and will only work intermittently. This doesn't seem to be the case with your set up. I guess that's the beauty of DC.
 
squareriggersailor said:
I was just surprised as Tunze never recommends oversizing skimmers because they have difficulty forming a foam head and will only work intermittently. This doesn't seem to be the case with your set up. I guess that's the beauty of DC.
Click to expand...
Not sure I saw any oversize recommendation from Tunze. I'll let Roger speak to that. Ive always gotten good foaming from break in till today. Even when only 3 fish. I do use NoPox so good skimmer was important. But stopped it for a few weeks and I still got a great skimmate that was either light or dark depending on speed.

Glad I didn't hear about oversize before, might not have got it. :)
 
Quietman said:
Not sure I saw any oversize recommendation from Tunze. I'll let Roger speak to that. Ive always gotten good foaming from break in till today. Even when only 3 fish. I do use NoPox so good skimmer was important. But stopped it for a few weeks and I still got a great skimmate that was either light or dark depending on speed.

Glad I didn't hear about oversize before, might not have got it. :)
Click to expand...
I love the old style collection cup on the 9410, it takes me back to the 90s. I would love to have one but have seen Roger advise against oversizing skimmers multiple times over the years on here and elsewhere. I'm glad it's working for you, I may have to ask Santa for one this year.
 
It really depends on what you want to do. My current tank is 265 and I went slightly oversized (9430) and while I don't yet regret it, it skims consistently, it would be nice to have some accumulation of nutrients, 7 weeks in and still no detectable NO3 and PO4 and I have battled dinoflagellates as a result. I think ideally you want some ability to build a level of nutrients you can control as needed with water changes and GFO, etc. I will see if heavily stocking fish can help.
 
Agree...I'm maintaining measurable nitrates and phosphates, more than just measurable at times :). Seems the 9410 DC is a good fit for RSR170 with carbon dosing. It is for me anyway....and I'm not fully stocked yet. I don't know if the AC version would adjust as well, though....major reason I went with DC version.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%

  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%

  • No.

    Votes: 26 37.1%

  • Other (please explain).

    Votes: 3 4.3%
See comments…

New Posts

Top Shelf Aquatics
Nutramar Foods
Tidal Gardens
World Wide Corals
TCK Corals
Deltec
Chewy.com
Dinkins Aquatic Gardens
New Posts
Back
Top