New Aquascape build, how told hold it all together

Anubisxii

Active Member
View Badges
Joined
Jun 8, 2020
Messages
398
Reaction score
439
What state or country do you live in
Florida
Rating - 0%
0   0   0
Looking to do a negative space ish aqua scape. I have a 18.5g cobalt aio and I'm moving up to a 40g breader and move everything over.

I bought about 30+ extra pounds of dry rock and I'm trying to figure out how to glue it all together.

I have gel super glue and insta set - I know it's not enough to hold everything together.

I know people recommend e marco - $42 ish for a tub, not bad but I would like to get something more cost effective.

Some say hydroligic cement, I could live with that. Again is there anything I need to look out for ingredient wise so it's reef safe.

I saw a lot of people use jb weld, that's sounds not tank safe but what do I know.

Anyone have any recommendations as to what would work best and that could hopefully grab locally from a hardware store that's reef safe?

Thanks for any input.
 
I had mocked up these arches but I feel like a lot of tanks go that route. So was thinking to do the weird bonzi tree looking route

PXL_20200912_234920987.jpg PXL_20200912_201907565.jpg PXL_20200912_201904549.jpg PXL_20200912_201849615.jpg
 
I normally use epoxy and gel super glue but I'm planning on doing something different this time around like piks below

Screenshot_20200912-193416.png
 
In fairness it's not the money it's waiting on delivery, I wanted to build all this tomorrow. I am going to think it over I'm just super impatient when it comes to tank upgrade time. I have everything ready to go and I plan on picking up the tank Tuesday and hopefully throwing everything that night. But I'll keep researching see.
 
I also have like a dozen corals in the tank and noticed my war coral that's the size of a mini snickers bar has 6 inch sweepers that come out at 3 am on the dot every night. I couldn't believe my eyes
 
I was thinking about going the hydrolic concrete option but just read a 3 page post with mixed reviews I only plan on keeping this set up until July when we move and then I'm going the red sea 350 or waterbox 100.3 route.
 
On my current scape I didn’t use any glue to hold the rock together. They’re just shish kabobed together. On my new build, I’ll use rods plus emarco. The structures in the 210 will be a bit bigger than this 54 gallon. On that GMAC reef website they did use mortar to hold the rock together after drilling and doweling together. Another thing I do that’s not mentioned on that website is peg corals. I’ll drill multiple 1/8 inch holes throughout the rock work to peg corals. I cut off the bottom of the frag plug to where it’s just the flat disc. Then drill an 1/8 inch hole in the middle of the plug. Then I’ll take a piece of 1/8 inch acrylic rod about an inch or so long and glue that into the hole on the frag plug. Then you can just insert that coral anywhere you want into the holes you’ve drilled throughout your rock work. Just slide it into the hole. Corals fighting, just move it. Makes it easy. Of course once certain corals encrust it make them more difficult to move. Every coral in my set up is attached in this manner. Even the volley ball sized leather on the big structure is attached this way! That pillar is about 19 inches tall. I attached an older pick for comparison. You can see how I’ve moved corals around a bit. You can also see the growth between the two pics.


215968EB-0B81-488B-8C66-659DFD99F696.jpeg
D7535D67-DAA2-4098-9D2F-C312D6B4B542.jpeg
 
That's super impressive. I would have never expected to drill the holes for the corals that's absolutely brilliant if you ask me. When you say it's just shish kabob together You're just using basically those driveway rods that everybody references using other fiberglass or acrylic?
 
Yep you got it. Some use acrylic rods and others use fiberglass. I have used them both in the past. On this current tank I just used the Fiberglass driveway markers. They’re cheap and strong as heck. That’s what I’ll use on the new build also. Lots of people use these rods. I purchased them from Lowe’s, but noticed the other day Walmart even sells them.
I just lay out the rock and start piecing it together.
When I find a look I like, I’ll take note of the spot where the rocks are making contact. And then drill each rock and slide a rod in one rock, and then the other. You can also get a long bit and drill thorough multiple rocks at by same time.
I’ve used pvc in the past also. These are the rods that Lowe’s sells. https://www.lowes.com/pd/Hillman-48-in-Red-Driveway-Marker/3044825
Here’s an example of stacking using pvc.
07C8EB59-EFEA-4AC2-A2DE-E3BEFF9398DA.png
84004989-014D-4846-A764-EBFFE19B9B58.png
22E7C48B-F6F4-49A0-9E29-967EEB462909.png
F29A1198-544D-47D4-AA0B-A739A95B901A.png
 
Thank you so much I really appreciate the info I'm going to go hit the store tomorrow and see what I can get done.
 
I would would wait it out and order the Marcos.. thats my opinion. however... I also feel if you use alot of super glue its pretty darn strong too.. I did super glue and Marcos on my rocks, I have a waterbed 100.3

Screen Shot 2020-09-13 at 10.32.05 AM.png
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top