New candy cane help.

Zoa_Fanatic

Valuable Member
View Badges
Joined
Jun 4, 2020
Messages
1,945
Reaction score
1,324
Rating - 0%
0   0   0
Got some new candy canes after nuking my old ones. Just blew some sand off them and it looks like they have a tiny bit of tissue damage betwee where the heads are splitting. Will they be ok?


1C8469EB-EA91-4D3C-9C1B-9E20BD77F45D.jpeg
 
Tissue loss or sting by a nearby coral. Make sure to keep other coral about 3" away from it. Maintain Moderate light and water flow and add a little iodine and potassium to help with tissue healing.
 
Tissue loss or sting by a nearby coral. Make sure to keep other coral about 3" away from it. Maintain Moderate light and water flow and add a little iodine and potassium to help with tissue healing.
I don’t have any other coral. They did that when I was blowing sand off them. Will they be ok? I didn’t even blow water on them that hard.
 
I don’t have any other coral. They did that when I was blowing sand off them. Will they be ok? I didn’t even blow water on them that hard.
They should be fine and continue to grow provided water conditions are good.
For the future, unless significant amount of sand, they are able to eject the sand themselves.
 
They should be fine and continue to grow provided water conditions are good.
For the future, unless significant amount of sand, they are able to eject the sand themselves.
My water parameters are 0 ammonia, 0 nitrite, pH 8.2-8.0 ( kinda colorblind can’t tell), 10-20pppm nitrates and falling. I had another set o FW nuked like an idiot. Are those parameters ok for them?
 
They should be fine and continue to grow provided water conditions are good.
For the future, unless significant amount of sand, they are able to eject the sand themselves.
This is where I have them in the tank. Flow is biocube 32 led stock return pump. Stock light as well. Other colony was growing great in the same spot before FW.

AE113550-BB56-4278-B5DD-495E7E789EBE.jpeg
 
My water parameters are 0 ammonia, 0 nitrite, pH 8.2-8.0 ( kinda colorblind can’t tell), 10-20pppm nitrates and falling. I had another set o FW nuked like an idiot. Are those parameters ok for them?
Nitrates a bit high.

Salinity - 1.025
PH - 8.1.-8.3
Temp - 77-99 deg

This is not a new tank by chance, is it ? Not an ideal beginner coral although can be done
 
This is where I have them in the tank. Flow is biocube 32 led stock return pump. Stock light as well. Other colony was growing great in the same spot before FW.

AE113550-BB56-4278-B5DD-495E7E789EBE.jpeg
Bring it up a bit higher
 
Nitrates a bit high.

Salinity - 1.025
PH - 8.1.-8.3
Temp - 77-99 deg

This is not a new tank by chance, is it ? Not an ideal beginner coral although can be done
Lol no it’s not new. I’ve had a tank for almost 8 years. I just swapped from a nanocube 29 but used the same rock and water. New sand. Tank has been through a mini cycle. Workin on reducing nitrates. They are falling quickly. Salinity is 1.025, I keep the tank at 78 degrees always, pH is between 8.0-8.2. What do you think?
 
Lol no it’s not new. I’ve had a tank for almost 8 years. I just swapped from a nanocube 29 but used the same rock and water. New sand. Tank has been through a mini cycle. Workin on reducing nitrates. They are falling quickly. Salinity is 1.025, I keep the tank at 78 degrees always, pH is between 8.0-8.2. What do you think?
As long as not false readings from test kit ( Mainly API), parameters are good
 
they are a hardy coral,keep "bad area " clean,will have 10 heads before christmas :)
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%

New Posts

Back
Top