New Hydros App/FW Releasing 2/7/23

JeffB418 · Feb 6, 2023

App & Firmware Update

New firmware 286 and App 2.6.0 (253) are coming on February 7 at 4 pm CST! The firmware is compatible with the following devices: Control X4 Control X2 Control X3 Control XP8 Control XS Control XD WaveEngine WaveEngine v2 WaveEngine LE The firmware update is NOT compatible with the IceCap...

forum.coralvuehydros.com

New firmware and App 2.6.0 (253) are coming on February 7 at 4 pm CST!

The firmware is compatible with the following devices:

Control X4
Control X2
Control X3
Control XP8
Control XS
Control XD
WaveEngine
WaveEngine v2
WaveEngine LE

The firmware update is NOT compatible with the IceCap WiFi Controller. The current firmware version for the IceCap WiFi controller is 263.

IMPORTANT:

NEVER, EVER, EVER update your firmware if you are not in the same location as your controller.
The firmware requires App 2.6.0 (253). To update to the latest firmware, you must first download the latest app verison from the app store. If you are using the web app, please clear your browser's cache so it updates to the new app as well.

On Vacation and Need Access the previous app version?
If you are on vacation and cannot update the firmware right away, you can always access your devices via the Web App (Previous). Note that if you update the firmware, you will not be able to use the old app.

Installation Instructions:

Step 1: Download the new version of the app from your app store
Step 2: Download and install the latest firmware version. You must first download App version 2.6.0 (253) before updating to the newest firmware version.

Please visit the CoralVueHYDROS.com website for more in-depth instructions on downloading and installing the new firmware.

Full Changelog

JeffB418 · Feb 6, 2023

Update includes a complete overhaul of graphs. Including drag and zoom functions as well as comparing inputs.

HYDROS Control - Understanding the Input Graphs - Help Page

A full understanding of the HYDROS input graph features.

www.coralvuehydros.com

rroselavy · Feb 6, 2023

Sweet! Thanks Jeff. I am really liking the controller so far, but am a bit disappointed with the current graphs. It will be nice to see what they have done.

JeffB418 · Feb 7, 2023

It’s live!

Check out the graphs! Nickelback approved.

JeffB418 · Feb 8, 2023

Support for new triple level optical sensor added as well. Currently no ETA on when these will be available, but these new sensors have 3 optical sensors built in for triple failure redundancy. The bottom 2 sensors allow for physical hysteresis for detecting wet/dry, esp using it with the ATO profile. The top sensor provides a "overflow" alert state for cases where an ATO has run too long or other similar issue.