New maxspect razorX arrived

[mta_morrow]

I had the prior Razor and like it a lot.

Absolutely love the look of the new on on my new build!

Also got the WiFi module!

 

[atx100r]

What size tank and fixture is that?

 

[atx100r]

What size tank and fixture is that?

 

[mta_morrow]

What size tank and fixture is that?

It is a RSR 525xl with the 300 watt fixture

 

[Lor]

Looing god, How heavy is te whole fixture?

 

[ryanuy]

How deep is your tank and would you happen to know how much is the PAR on the bottom of your tank?

 

[mta_morrow]

Looing god, How heavy is te whole fixture?

I don’t know. I can hold it with one hand no problem. Try the maxspect website for specs

 

[mta_morrow]

How deep is your tank and would you happen to know how much is the PAR on the bottom of your tank?

Using my seneye, I can go from 80 par to around 150 in the sand bed no problem.

 

[Joepalazzolo]

What are your settings for the lights

 

[Joepalazzolo]

I have the same light, can you give me some advice/tips on the light setting. I can't seem to get it right. Any thoughts would be appreciated. Thanks

 

[revhtree Verified Admin]

How are you liking your razor?

 

[mta_morrow]

How are you liking your razor?

Wow Rev, going thru old threads of mine and see that I never answered you!
Any way, I have really like my Razors. Had one on my first tank as well. This newer RazorX is full spectrum with a super easy to use app (requires the ICV6 module) which also allow you to use the app for gyre programming too.

getting great growth and my wife likes the sleek look which is a plus!

 

[cjpitt80]

Wow Rev, going thru old threads of mine and see that I never answered you!
Any way, I have really like my Razors. Had one on my first tank as well. This newer RazorX is full spectrum with a super easy to use app (requires the ICV6 module) which also allow you to use the app for gyre programming too.

getting great growth and my wife likes the sleek look which is a plus!

Any help on lighting SETTINGS?

 

[mta_morrow]

Any help on lighting SETTINGS?

What can I help you with?

 

[cjpitt80]

What can I help you with?

Thanks for the reply. I have the 200w version of the same light. Just wondering what settings you're using with the Syna-G app. I plan on running a LPS dominate mixed reef. I went thru most of your build thread, but I didn't see any specifics about your light settings. Looks like you're getting good growth though, so any help you can provide would be greatly appreciated. I plan on renting the PAR meter from BRS soon also.

My current light setup is as follows (please let me know if this works)

 

[mta_morrow]

Sorry I haven’t replied sooner. I run the LPS preset at 12K. My nems like the lower Kelvin.

lights come in at 11:00 am, 4 hour ramp up. Then start ramp down at 6:30 till 9:30. Then channel C stays on at 1% till midnight. Then all lights out.

 

[cjpitt80]

Sorry I haven’t replied sooner. I run the LPS preset at 12K. My nems like the lower Kelvin.

lights come in at 11:00 am, 4 hour ramp up. Then start ramp down at 6:30 till 9:30. Then channel C stays on at 1% till midnight. Then all lights out.

Thanks!
Did my QR code work?
I run a modified LPS. I'd like to get the channels up to 80/60/60/80 (or whatever the SPS setting is) my yellow coris looks amazing under the brighter light.

 

[mta_morrow]

Thanks!
Did my QR code work?
I run a modified LPS. I'd like to get the channels up to 80/60/60/80 (or whatever the SPS setting is) my yellow coris looks amazing under the brighter light.

I could not get the QR to work. Whe I started with this light I already knew the spectrum I wanted as my fish are so colorful. But I wanted to bump up the power and meek the spectrum. So you can save your program and name it since you have the icv6 module. Do that and write it down too just in case. Then, do easy setup again, choose the same spectrum and the sps. Then you can see where the ABCD channels are set. Then reload your current settings and ramp up slowly by like 1-2% all channels per week.

 

[cjpitt80]

I could not get the QR to work. Whe I started with this light I already knew the spectrum I wanted as my fish are so colorful. But I wanted to bump up the power and meek the spectrum. So you can save your program and name it since you have the icv6 module. Do that and write it down too just in case. Then, do easy setup again, choose the same spectrum and the sps. Then you can see where the ABCD channels are set. Then reload your current settings and ramp up slowly by like 1-2% all channels per week.

Maybe the QR only works if sent via cell phone? I just screen shot it and posted. Seems like a pretty cool feature. Anywho..... I've basically done exactly what you've said, with the exception of doing a peak mid day at the SPS levels instead of bumping up 1% a week. I plan to extend the peak 30min a week until the I get the full day lighting. I'm also going to rent the PAR meter from BRS to get some actual numbers, as I'm just going by what looks good to me. Right now, I only have a couple frogspawn and zoa colonies, so I'm not too too worried about frying much.

 

[mta_morrow]

Maybe the QR only works if sent via cell phone? I just screen shot it and posted. Seems like a pretty cool feature. Anywho..... I've basically done exactly what you've said, with the exception of doing a peak mid day at the SPS levels instead of bumping up 1% a week. I plan to extend the peak 30min a week until the I get the full day lighting. I'm also going to rent the PAR meter from BRS to get some actual numbers, as I'm just going by what looks good to me. Right now, I only have a couple frogspawn and zoa colonies, so I'm not too too worried about frying much.

You should consider buying a seneye vs renting the par meter. I love mine.......priceless when you “need to know” par or spectrum.