No bar graph or logs on DOS

[Mark]

My DOS widget has never shown me a bar chart depicting dosing. And when I drill into the DOS logs, I see nothing. I have logging enabled and have a schedule to dose 70ml per day. What am I missing? I do see the liquids in the DDR drop over time and do catch it dosing the fluid during these interval times. I would just like to visualize it in Fusion.

 

[Mark]

Here's where I can show that logging is enabled.

 

[Billldg]

This may sound a little weird, but try unchecking those enable boxes on alk and cal, I just checked mine and they r unchecked.

 

[Billldg]

@Mark, this is what mine looks like

 

[Mark]

@Mark, this is what mine looks like

Thanks Bill. I tried that as well. This is frustrating.

 

[pelphrey]

Is the firmware on your apex and dos pump(s) up to date?

 

[Mark]

Is the firmware on your apex and dos pump(s) up to date?

Looks like it:

AOS Update
This Apex is up to date and no update is required.
Current AOS
5.04_7A18
Newest AOS
5.04_7A18

Type DOS
Name DOS_5
Address 5
Hardware Version 1
Software Version 7 (OK)

 

[Mark]

Jon at Neptune helped me out. For those who may find this post while researching same issue, the problem for me was that 'Auto Clock Set' was disabled under clock settings. Once I enabled that and restarted the apex, all was good!

 

[pelphrey]

Jon at Neptune helped me out. For those who may find this post while researching same issue, the problem for me was that 'Auto Clock Set' was disabled under clock settings. Once I enabled that and restarted the apex, all was good!

The clock settings make sense! Thanks for updating the thread with a resolution!