Nuvo 40 protein skimmer

[LetItReef]

Hell0,

Any recommendations that will fit on the chamber? Thanks!

 

[aaron23]

I used an aquamaxx hob1 skimmer but as with all hang on skimmers they're not very good

 

[Salt Creep01]

Tunze 9004 in the return section. Just make sure you have a ato

 

[LetItReef]

I used an aquamaxx hob1 skimmer but as with all hang on skimmers they're not very good

Good buddy of mine has one of this and working well.
I would like to own one but I prefer that one that would fit inside the chamber. Thanks!

 

[LetItReef]

Tunze 9004 in the return section. Just make sure you have a ato

I saw this one. But why on the return side, too big? Thanks!

 

[reefwiser]

The 9004 will only fit in the water overflow section of the rear chamber.An you have to install it side ways in the section. You face the intake teeth section of the skimmer towards the center of the rear chamber. That is the only way it will fit into the rear of the IM 40.

 

[adamfrer12]

Rio nano hob skimmer

 

[nickg]

I have run all listed... I now have a Cad Light. By far the best for the $$$! In my opinion.

 

[Falk]

I run a coral box 150 skimmer in my 30L and works great for $60

 

[LetItReef]

Rio nano hob skimmer

I have run all listed... I now have a Cad Light. By far the best for the $$$! In my opinion.

I run a coral box 150 skimmer in my 30L and works great for $60

Thanks! I will research these and hope one of these will fit inside the chamber, not a hang on.

 

[Jrco226]

I've been running a reef octopus hob 90 for a few months now. Easy to get setup and adjust. Pulls out tons of junk. Change the cup every few days.

 

[slayerhellfire]

I use the ghost skimmer on my 40 nuvo works great

 

[LetItReef]

I've been running a reef octopus hob 90 for a few months now. Easy to get setup and adjust. Pulls out tons of junk. Change the cup every few days.

Does it fit inside the chamber or hang on? Thanks!

 

[reefwiser]

Reef octopus hob(hang on the Back)

 

[Chrisfish]

I have the aquamaxx Hob -1 and am very happy with it, took a week to break it in but now it does the job just fine.

 

[Jrco226]

Does it fit inside the chamber or hang on? Thanks!

It's a hang on the back. If you plan on having two overflow compartments and say a reactor in another compartment this option won't work. It's going to take up one compartment for the return and the intake with my ato and heater take up another.

 

[LetItReef]

Thanks!

 

[willfly4food]

I have run all listed... I now have a Cad Light. By far the best for the $$$! In my opinion.

Which Cad Light did u put in your nuvo 40?