- Joined
- Jan 29, 2020
- Messages
- 184
- Reaction score
- 137
- What state or country do you live in
- Missouri
Inspired by BRS's Par measurements I went ahead and did my best to replicate it in my 40g breeder for the other Ocean Revive T-247 owners. I know its not as perfect as a 24x24 inch tank but I tried to do my best to provide some good info as I've had a hard time finding other real results/measurements.
Below are the measurements at 6, 12", and 17" Measurements were taken with an Apogee MQ-510 with the Blue lights at 100 percent. The Fixture is hung about 12 inches off the water. If you want to know what the par would be with the whites at 100 percent then I would just double the numbers. There's definitely a bit of a hotspot in the center where the lights start overlapping. I'm taking this as a plus as it will let me keep SPS in the Center and LPS and soft corals around the edges. Im sure as well if you added multiple fixtures it would even out the hotspots.
Cheers!
17 Inches below the waters surface.
12 inches below
6 inches below
Below are the measurements at 6, 12", and 17" Measurements were taken with an Apogee MQ-510 with the Blue lights at 100 percent. The Fixture is hung about 12 inches off the water. If you want to know what the par would be with the whites at 100 percent then I would just double the numbers. There's definitely a bit of a hotspot in the center where the lights start overlapping. I'm taking this as a plus as it will let me keep SPS in the Center and LPS and soft corals around the edges. Im sure as well if you added multiple fixtures it would even out the hotspots.
Cheers!
17 Inches below the waters surface.
12 inches below
6 inches below

