Hi guys and gals,
just wanted to get an opinion on my flow setup, I'm thinking this should create enough flow and turbulence needed for a reef tank but opinions/suggestions are welcomed. Tank is 48L x 20H x 18W (75 gallons) and is/will be SPS dominant
TOP VIEW ....excuse my MS Paint skills
Grey outlines estimate rock placement, this is an old pic showing the bare aquascape, the plumbing has since been done over and is on the other side
Return is around 500 gph when I used the flow calculator
A- 550 gph Koralia
B&C are both 1050 GPH Koralias
C is pointed slightly upwards, A is pointed straight across and is 2 inches from the surface, B is pointed slightly downward and the return is straight across at around 2-2.5 inches from the surface.
The return and powerhead C create the majority of the surface agitation in the tank.
Any input is appreciated.
just wanted to get an opinion on my flow setup, I'm thinking this should create enough flow and turbulence needed for a reef tank but opinions/suggestions are welcomed. Tank is 48L x 20H x 18W (75 gallons) and is/will be SPS dominant
TOP VIEW ....excuse my MS Paint skills

Grey outlines estimate rock placement, this is an old pic showing the bare aquascape, the plumbing has since been done over and is on the other side
Return is around 500 gph when I used the flow calculator
A- 550 gph Koralia
B&C are both 1050 GPH Koralias
C is pointed slightly upwards, A is pointed straight across and is 2 inches from the surface, B is pointed slightly downward and the return is straight across at around 2-2.5 inches from the surface.
The return and powerhead C create the majority of the surface agitation in the tank.
Any input is appreciated.


