Orphek Osix – OR3 LED Bar iCon Smart Dim Controller Launch

[Nate Chalk]

Orphek Osix 150 480 watt Will be available to ship in 20 days.

Counting down!!

 

[saltcreep74]

Which 4 OR3's color fixtures would you guys recommend for a 3 feet SPS tank. I'll be running them along with a 4 bulb T5 Hybrid fixture running all Blue+ bulbs.

Was thinking 2 x Blue Plus, 1 x UV/Violet, and 1 x Reef Day plus OR3's.

 

[MalteserReefer]

Hi there
(this is my first post lol)
What max height tanks can the LED bars be used realistically as the only illumination? How deep can they punch for an sps dominant tank? is 40” reasonable?

 

[Nate Chalk]

Still not available

 

[T.rex]

Hi , 1ch dim driver should be come soon .
So will be 6 and 1 .

Any update on the single channel dimmer? Love the color pop on my OR3 120 with my XR15s, but wish they would dim vs just turning on & off...

 

[Orphek Verified Sponsor]

Any update on the single channel dimmer? Love the color pop on my OR3 120 with my XR15s, but wish they would dim vs just turning on & off...

Hi T.Rex , The iCon dim driver for Or120 will announce in about 1-2 weeks. stock is ready.

 

[Orphek Verified Sponsor]

Osix OR3 150 – iCon 480 watt Smart Dim Controller Launch​

read more: https://orphek.com/osix-or3-150-icon-480-watt-smart-dim-controller-launch/​

 

[Orphek Verified Sponsor]

Orphek Osix 90 OR3 Reef LED Bar PAR measuring video by Becker Reef​

You can watch the video now or scroll down for a comprehensive understanding of why the combination of Osix 90 and Orphek OR3 90 LED Bars might just be the ultimate lighting system for SPS/LPS corals.

The aquarium​

Becker’s mixed nano reef aquarium is a 110 x 52 x 48 cm (43.3″ x 20.47″ x 18.89″) with predominant LPS corals tank.

The Orphek lighting system of his tank​

Having been thoroughly impressed by the positive feedback surrounding Orphek, he made the decision to incorporate 2 units of Orphek’s OR3 Blue Plus LED Bars + 2 units of OR3 Reef Day LED Bars + 2 units of OR3 UV/Violet LED Bars into his setup for his nano reef aquarium. 5 of the OR3 LED Bars were placed horizontally while 1 unit was placed in a small vertical angle.

These lights were expertly assembled and suspended at 36cm / 14.17″ over water, using Orphek Combo Fixing Bracket, Universal Mounting Arm & Mounting Arm Extension kits

The lighting system is seamlessly controlled and dimmed by Osix and programmed through the Orphek App.

PAR measure results​

To start, Becker measured PAR with his six Orphek OR3 LED Bars running at 100%. Check the screenshots below to see the impressive results!

Conclusions​

The PAR readings got incredibly high results!

After conducting various PAR readings, we present them below you can see that using the combo Orphek Osix 90 + OR 90 LED Bars you will have plenty of punch to grow any type of coral as well as an ideal spread across the tank.

How can I order Osix/ OR3 LED Bars/ Orphek Mounting Solutions / Combos or each product individually?​

Go to STORE to buy OR3 LED Bars/ Orphek Mounting solutions/ Combo Fixing Brackets + Universal Mounting Arm+ Extension kit in our online shop.​

(Obs.: Osix and Osix + OR3 Combo is not currently available in our online shop)

Go to CONTACT to buy Osix and Osix Combo​

 

[Quiverfull]

Is there an easy way to reduce the overall intensity of the channels in the Helius program? Can we lower all defaults simply or do we have to reduce each time point. For instance, the basic Helius program is set to a max of 80% intensity, can we lower all the time points by 20% as a group?

Thanks.

 

[Freakmachine01]

Is there an easy way to reduce the overall intensity of the channels in the Helius program? Can we lower all defaults simply or do we have to reduce each time point. For instance, the basic Helius program is set to a max of 80% intensity, can we lower all the time points by 20% as a group?

Thanks.

Not sure if this helps, but you can increase or decrease the overall by using 2 fingers and adjusting up or down