Orphek users ...help me out please.

bubbasguppies · Sep 5, 2019

So I've really been digging the SPS tank High Tide Aquariums has with the Orphek Atlanik v4. Watching a bunch of reviews has me wondering about led spacing compared to Radions n Hydras. I know the latter two are closely spaced but was wondering if one of you wouldn't mind measuring the spacing center to center. Am curious as one of these can light up a 2'x4' tank.

Thanks for the help

LARedstickreefer · Sep 5, 2019

High Tide Aquarium? Are you in Tallahassee, Florida?

bubbasguppies · Sep 5, 2019

Leesburg, GA....he's closer than ATL.

LARedstickreefer · Sep 5, 2019

Oh, a different HTA then...

bubbasguppies · Sep 5, 2019

No....he's in Tallahassee.

FacebookJail · Sep 5, 2019

bubbasguppies said:
So I've really been digging the SPS tank High Tide Aquariums has with the Orphek Atlanik v4. Watching a bunch of reviews has me wondering about led spacing compared to Radions n Hydras. I know the latter two are closely spaced but was wondering if one of you wouldn't mind measuring the spacing center to center. Am curious as one of these can light up a 2'x4' tank.

Thanks for the help

There is more spacing between diodes along the width of the fixture compared to the front to back. Spacing is 1.75" vs 1.5" measured between the mid point of each diode. See attached images.

When comparing single fixtures I think you will by far have the best spread with the Orphek. 4" wide for one fixture will be cutting it close though. If mounted high enough (say 14-18" off surface), it might be feasible, but only if there is little PAR demand on the very sides of the tank. Given that many tanks dont have rock or corals that extend to the edges, this might not be an issue.
Mine is mounted 22" over a shallow 2' x 3'and there is great PAR distribution and even a bit of spill over.

Hope that helps!

bubbasguppies · Sep 5, 2019

Thanks @FacebookJail for the info. Am planning my Deep Blue 80 gallon shallow build after our move to Florida. I just saw a video BRS did on it. So ill be shooting in the 16"-20" range. That way I can still have my LPS on the outer edges.